Power Team Mechanical Push Pullers
10, 17½ and 30 ton mechanical push-pullers for installing and removing pulleys, bearings, gears and a whole host of press-fitted parts.
The listed tonnage capacity of each push-puller is specified when the standard legs are in tension. The capacity will be reduced if longer legs are used or the legs are used in a compressed state. Always opt for the puller with the biggest capacity and the shortest legs that will suit the job.
Features
- Dependent on the puller set up, a pulling or pushing force can be exerted
- Short reach to an exceptionally long reach, should optional leg kits be used
- Power Team Push-Pullers are ideally suited for use with an impressive collection of bearing pulling attachments, internal pulling attachments and threaded adaptors
| Capacity (Tons) | Order No. | Can be used with | Reach | Max Spread | Screw Size |
|---|---|---|---|---|---|
 Datasheet |
|||||
| 10 | 927 |
No. 1100 legs and No. 24827 leg ends included
No. 1123 bearing pulling attachment No. 679 pulley pulling attachment No. 1150, 1151, 1152, or 1153 internal pulling attachments 1/2" of forcing screw tip end is threaded 5/8"–18 | 210 mm | 54 - 184 mm | 3/4"–16 x 305 mm |
| 17½ | 938 |
No. 1106 legs and No. 24827 leg ends included
No. 1124 and 1130 bearing pulling attachments No. 679 and 680 pulley pulling attachments No. 1150, 1151, 1153, 1165, or 1166 internal pulling attachments Leg ends threaded 5/8"–18 | 282 mm | 79–298 mm | 1"–14 x 336 mm |
| 30 | 939 |
No. 1109 legs and No. 28390 leg ends included
No. 1126 and 1127 bearing pulling attachments No. 680 pulley pulling attachment (two 8012 adapters are required to connect 680 to puller) No. 1165 internal pulling attachment Leg ends threaded 1"–14 | 267 mm | 178–413 mm | 1 1/2"–12 x 438 mm |
| Title | Order No. | Description | Leg Length |
|---|---|---|---|
| Datasheet |
|||
| 2x legs for 927 | 1103 | Reach equals 121mm plus 50.8 mm with leg end caps. | 121 mm |
| 1100 | Reach equals 171mm plus 50.8 mm with leg end caps. | 171 mm | |
| 1102 | Reach equals 298mm plus 50.8 mm with leg end caps. | 298 mm | |
| 1101 | Reach equals 400mm plus 50.8 mm with leg end caps. | 400 mm | |
| 2x legs for 938 | 1107 | Reach equals 114mm plus 50.8 mm with leg end caps. | 114 mm |
| 1106 | Reach equals 241mm plus 50.8 mm with leg end caps. | 241 mm | |
| 1104 | Reach equals 419mm plus 50.8 mm with leg end caps. | 419 mm | |
| 1105 | Reach equals 572mm plus 50.8 mm with leg end caps. | 572 mm | |
| 1108 | Reach equals 762mm plus 50.8 mm with leg end caps. | 762 mm | |
| 2x legs for 939 | 1109 | Reach equals 203mm plus 66.7 mm with leg end caps. | 203 mm |
| 1110 | Reach equals 457mm plus 66.7 mm with leg end caps. | 457 mm | |
| 1111 | Reach equals 711mm plus 66.7 mm with leg end caps. | 711 mm | |
