Power Team Slide Hammer Pullers
Covered by a lifetime warranty
Blind hole puller sets, slide hammer sets, bearing cup removers, pilot bearing pullers and reversible jaw slide hammers.
Slide Hammers
| Puller Type | Order No | Description |
|---|
 Datasheet |
|
 | Slide Hammer | 22185 | 1.1 kg sliding hammer. |
 | Slide Hammer | 34331 | 2.3 kg sliding hammer. |
 | Puller Head | 1174 | 1174 Puller head, less slide hammer. |
 | Basic Slide Hammer | 1155 | Compatible with internal pulling attachment. Compatible with threaded adapters. 610 mm length, 5/8"–18 threaded end and 2.3 kg hammer. |
 | Basic Slide Hammer | 1156 | 1155 slide hammer unit with 1.1 kg hammer. |
 | Reversible Jaw | 1176 | 1.1 kg hammer, 7241 two-way head and 34698 jaws. Ideal for pulling gears, bearings, outer races, grease retainers, oil seals, etc. Two or three jaws may be used and positioned for “inside” or “outside” pulling jobs. Both have 5/8"– 18 threaded end so attachments and adapters may be used. 2-Jaw set has 31.8 to 88.9mm inside spread and the 3-Jaw set has 38.1mm to 114mm inside spread. |
 | Reversible Jaw | 1177 | Same as 1176 but with 2.2 kg hammer. |
Bearing Cup Removers
| Puller Type | Order No | Description |
|---|
| Datasheet |
|
 | Universal Bearing Cup Remover | 7136 | The 7136 is perfect for pulling internal bearing cups, seals, bushings, etc. Jaw spread – 23.8 to 82,6 mm, reach to 88,9 mm. Use with any slide hammer having 5/8"-18 thread (Power Team 1155, 1156 or 927 Push-Puller). |
 | Slide Hammer with Cup Pulling Attachment | 1157 | Consisting of slide hammer No. 1156 with No. 1152 internal pulling attachment for removing oil seals, outer races, and bearing cups from blind holes. 102mm max reach and 38.1 to 152mm spread. |
 | Slide Hammer with Cup Pulling Attachment | 1158 | 1157 but with 1155 2.2kg slide hammer. |
 | Pilot Bearing Puller | 1170 | 19.1mm Reach, 12.7 to 38.1mm Internal Diameter Spread. These versatile pullers are built especially for inside pulling jobs, and particularly for removing flywheel pilot bearings on machines and construction vehicles. Also very practical for pulling motor, generator and magneto bearings. |
| Pilot Bearing Puller | 1171 | 25.4mm Reach, 22.2 to 54mm I.D. Spread. |
 | Pilot Bearing Puller | 1172 | 44.5mm Reach, 12.7 to 50.8mm I.D. Spread. |
 | Slide Hammer Puller | 1173 | Ideal for pulling jobs in very close quarters, as in removal of small-bore bushings, bearings, oil seals, etc. Internal pulling attachment has jaw spread of 12.7 to 35 mm. Handle end has a 1/2"– 20 thread. |
Puller Sets
| Puller Type | Order No | Description |
|---|
| Datasheet |
|
 | Blind Hole Puller Set | 981 | With slide hammer, forcing screw, bridge, actuator pins, collets, and storage box. Removal of bearings, bushings, sleeves and other friction-fitted parts from blind holes can now be accomplished with ease. Set provides selection of expanding collets 8 to 44.5 mm I.D. Collet is placed through bore of part to be removed, then expanded with actuator pin so that lips of collet secure a positive grip for pulling. Pulling force is exerted by means of a forcing screw and bridge assembly or with a slide hammer. |
 | Slide Hammer Puller Set | SS2 | This very handy set is ideal for those close-quarter, inside pulling jobs. Very practical for pulling motor, generator, and magneto bearings. Also good for removing small-bore bushings, bearings, and oil seals. |
 | Slide Hammer Puller Set | 1178 | This useful set contains a reversible-jaw slide hammer puller with a 1.1 kg sliding hammer plus an assortment of special jaws (3 of each size) and adapters. In this set, you get all the versatility you demand of a slide hammer puller. |
