The SGS 50 litre high flow air compressor is ideal for DIY and trade applications such as spray-painting, tyre inflation, nailing, stapling, sanding, drilling, cutting and grinding thanks to it's impressive 50L capacity, high flow 9.6 CFM air displacement and 8 bar maximum working pressure. It offers a fantastic combination of performance, safety and value for money. Also included are are all the hoses, accessories and fittings needed to start using the compressor with the air tool of your choice.
This 71 piece air tool kit is designed to give you everything you need to get started using your air compressor, including essentials and basics such as the 1/2 inch impact wrench, the 3/8 inch air ratchet wrench, and the
150mm air hammer, along with some more specialist and niche accessories and add-ons including both male and female nipples and 10 sanding sleeves.
This kit has been produced specifically to make air compression tools simple to use, efficient, and cost effective.
Please note this compressor is for semi-pro and not commercial use.
Included:
50L air compressor
71pcs Air Tool Kit
10m long 8mm diameter Rubber Hose With Quick CouplersÂ
Mini inline oiler
Compressor oil
Air line oil
The Air Toolkit Includes:
1pc - 1/2" Air Impact Wrench
1pc - 3/8" Air Ratchet Wrench
1pc - 150mm Air Hammer
1pc - 1/4" Air Die Grinder
1pc - Air Blow Gun
8pc - Impact Sockets: 9, 10, 11, 12, 13, 14, 17, 19 mm
1pc - 3/8" To 1/2" Adaptor
1pc - Screw Bit Holder
1pc - Air Quick Coupler Female
5pc - Male Nipples
1pc - Female Nipple
3pc - Chisels
1pc - Spring Retainer
1pc - Ball Foot Air Chuck
1pc - Rubber Nozzle
1pc - Safety Nozzle
1pc - High Pressure Nozzle
1pc - Tapered Nozzle
2pc - Sport Needle
1pc - 1/4" Male-Female Nipple
1pc -1/8" Collet
10pc - Grinding Mounted Stones
1pc - Sanding Drum
10pc - Sanding Sleeve
9pc - Screw Bit
2pc - Hand Wrenches
1pc - 4 Mm Hex Wrench
1pc - Teflon Tape
1pc - Oil Pot
1pc - Blow Mould Case
The powerful 2.5 HP engine ensures a short wait for the tank to pressurise - keeping you working.
Fitted with safety valve and pressure regulator with gauges for controlled air pressure. Twin air outlets for increased versatility allow two air-lines / tools to be connected at the same time. Fitted with euro quick release connectors.
SGS are a British company with full spares, warranty and service centre based in our East Midlands HQ. Our air compressors are hand built by our expert engineers to the highest standard of quality and are European CE marked and German GS certified for product safety. The compressor is shipped with oil but may require additional oil before first use.
This compressor is fitted with a standard 13A UK plug.
Engine Size: 2.5 HP
Power Consumption: 1.5 kW
Voltage: 230 V @ 50 Hz
Rated Speed: 2850 rpm
Current: 7.5 A
Air Displacement: 9.6 CFM
Sound Level: 97dB
Discharge Pressure: 115 PSI / 8 bar
Restart Pressure: 70 PSI / 4.8 bar
Tank Capacity: 50 litres
Air Outlet: 1/4" BSP to Euro Coupler. The fitting can be swapped for PCL fittings, please check Fitting & Couplers section.
Size
Dimensions: (L) 700 x (W) 390 x (H) 710 mm Covered by a 2 year extended warranty.
Due to a change in EU legislation the safety valve rings have been removed by ALL manufacturers of air compressors. This is due to the ring being incorrectly used to vent the compressor, causing undue wear which should not be present on a safety device. The air should drained from the tank via the valve on the belly of the tank. This location is used so that the water is drained at the same time.
The compressor is shipped with oil but may require additional oil before first use.