100 Ton Roll Bed Hydraulic Press

High Quality Precision Engineering From SGS
Call 01332 576 850 for sales and advice or enquire below

* Required Fields

Overview

Technical Dimensions

100 Ton Roll Bed Hydraulic Press

Key Features

  • 100 Ton capacity cylinder
  • Power Team Lifetime Warranty
  • Patented Roll-Bed design
  • 24 volt remote control hand switch
  • 333mm stroke
  • Movable workhead glides

Product Specifications

Part Number RB10013S-E380
Product Weight 1134kg
Warranty Lifetime Warranty
Brand Power Team
Certified To CE Rated
Pressing Capacity 100 Ton
Pump Model PQ1204S-E380 Electric Pump
Cylinder Model C10010C
Cylinder Stroke 333mm
Floor Space 1632-1537mm
Overview
Powered by a Power Team PQ1204S 380v Electric pump and a RD10013 double acting cylinder combination that can deliver 333mm stroke at a fast approach speed of 889mm/stroke and 147mm/stroke when pressing.

Solenoid valve with 24 volt remote control hand switch.

The original, patented Roll-Bed® design. Bed rolls out for easy loading and unloading with a crane or other lifting device. Movable workhead glides easily side to-side for full off-center load capacity across width of upper frame.

1.283 x 1.524 mm daylight.

Pump Electrical Specifications
PQ120 Series – 2,24 KW, 380 volt, 50 cycle, three phase. NOTE: Different voltage and valve options can be obtained by substituting certain PA, PE or PQ series pumps. Consult the factory.

Write a review

Please select your rating from below
 
1 1 star
2 2 star
3 3 star
4 4 star
5 5 star
Quality
Price
Delivery

Accessories for Your Press

Press Threaded Adapters Press V Block
Threaded Adapter - Diagram
V-Block - Diagram
Order No.


Order No. A B C D
38597†‡ 1 - 8 1 - 8 19.1mm 33.3mm 1890 50.8mm 288.6mm 31.8mm 120°
38953†‡ 1 1/4 - 7 1 1/2 - 16 69.9mm 111.1mm 1891 63.5mm 292.1mm 44.5mm 120°
37368‡ 1 5/8 - 5 1/2 42.9mm 63.5mm 1892 88.9mm 355.6mm 50.8mm 120°
43562‡ 2 1/4 - 12 57.2mm 76.2mm 1893 127mm 355.6mm 38.1mm 120°
38954‡ 1 5/8 - 5 1/2 1 11/16 - 8 82.6mm 106.4mm 207395 146.1mm 584.2mm 63.5mm 120°
43563‡ 2 1/4 -12 2 3/4 -12 57.2mm 81mm  
46070‡ 2 1/4 -12 2 - 4 1/2 57.2mm 81mm
†Optional Accessories for use with CC5, CC10 & CC25 Hydraulic C-Clamps 
‡ Used with Press Accessory Kits

 

Accessory Kits for Your Press


Press Accessory Kits - V-Throat, V-Blocks, Pushing Adapters, V-Pushing Adapters, Single/Double Acting Cylinders

A B C D E F G
Order No. Use With 
Press:
V-Throat 
Press Plate
V-Blocks Pushing Adapter ‡ Pushing Adapter ‡ V-Pushing
Adapter
Single-Acting Cyls. Double-Acting Cyls. Pushing Adapter
SPA10 10 Ton 1888 1890(Pr.) 201923† 
1/2" dia. shank
201454† 3/4" dia. shank 34806† Included in Set
38597 38597
SPA25 25 Ton

1889

1891(Pr.) 34510† 
3/4" dia. shank
34511† 
1" dia. shank
34807† Included in Set
38953 38953
SPA55 55 Ton 1892(Pr.) 34755
1" dia. shank
34756
1 1/2" dia. shank
34808 Not Included 
Order Separately
37368 38954

SPA100

80/100 Ton


1893  **
(Pr.)



36469
Not Included 
Order Separately

21332
43562
46070 ***
43563
46070
SPA200 150/200 Ton 207395 (Pr.) 44458
2 1/4" dia. shank
44457 None*
* Pushing adapters thread directly into RD15013 and RD20013 cylinders. 
** V-blocks, No. 1893, are recommended for use with 80-ton Roll-Bed® press. Not recommended for use with 100-ton Roll-Bed® press. 
*** For 80-ton Roll-Bed® press. 
† Also, an Optional Accessories for use with CC5, CC10 & CC25 Hydraulic Clam
NOTE:
 Individual press accessories may be ordered separately. 

‡ CAUTION: Pushing adapters are designed for use with specific shaft sizes, and depending on the condition of the shaft ends, the adapter may not withstand the full press tonnage. Always use a protective blanket or other suitable guard when pressing.
Product Manual

Product Manuals

Delivery
Delivery information

Delivery information
Delivery information

Delivery information
Warranty

Warranty Information

Warranty information