Power Team Electric Hydraulic Pumps

Place an Enquiry

PE17 Series - 700 bar - CE Rated 110V & 220V

Up to 55 Ton. 279 cm3/min. Two Speed.

For maintenance and construction applications.

  • For use with single-acting or double-acting cylinders.
  • For intermittent duty; starts under full load.
  • Equipped with 0.37 kW, 3,450 rpm, single-phase, thermal protected induction motor; 3 m remote control cord (PE172S has 7.6 m cord)
  • Low amperage draw; small generators and low amperage circuits can be used as power source.
  • Extremely quiet noise level (67-81 dBA).
DescriptionOrder No.Valve TypeValve No.Valve FunctionReservoir (l)

Datasheet

Available in 110V or 220V - contact us for more information.

** "Advance" position holds pressure with motor shut off.

† "Advance" position holds pressure with motor shut off. "Return" position advances cylinder with motor running and returns cylinder with motor shut off.

†† Control switch on PE17 series wired with line voltage.

§ Not to be used for lifting.
0.37 KW pump with 7.6 l thermoplastic reservoir. Available in 110V or 220V.PE1722-Way9517Advance Return (Auto+)4.72
PE172 except has 9.5 l aluminium reservoir.PE172M2-Way9517Advance Return (Auto+)6
PE172 except has solenoid operated valve.PE172S3-Way9570Advance Hold Return4.72
PE172S except has aluminium reservoir.PE172SM3-Way9570Advance Hold Return6
Best suited for crimping, punching and pressing. Thermoplastic reservoir.PE172A §Auto./Dump Manifold45554Advance/Return4.72
PE172A except has aluminium reservoir.PE172AM §Auto./Dump Manifold45554Advance/Return6
PE172 except has 9500 double-acting valve.PE1744-Way9500Advance Hold Return**4.72
Same as PE174 except has aluminium reservoir.PE174M4-Way9500Advance Hold Return6


Place an Enquiry

PE46 Series - 700 bar - CE Rated 110V & 220V

Up to 100 Ton. 600 cm3/min. Two Speed.

Best suited for under the roof maintenance and production applications.

  • Two-speed high performance pump. For use with single or double acting cylinders at operating pressures to 700 bar.
  • 1.12 KW / 1.5 hp 2,875 rpm single-phase, 50 Hz thermal protected induction motor that starts under full load.
  • Noise level of 77-81 dBA.
  • All equipped with a 3.1 m remote control except PE462S which has a 7.6 m remote control.
  • 24 volt control circuit on all units with remote control.
  • CSA rated for intermittent duty.
For use with Cyl. TypeDescriptionOrder No.Valve TypeValve No.Valve FunctionReservoir *** (l)

Datasheet

Available in 110v or 220v.

** "Advance" position holds pressure with motor shut off.

*** Usable oil is calculated at the recommended level of 13 mm below reservoir cover plate.

† "Advance" position holds pressure with motor shut off. "Return" position returns cylinder.

The remote motor control switch on PE46 series pumps is 24 volt.

∞ Not to be used for lifting. When pump is shut off, oil returns to reservoir.
Single Acting1.12 KW pump with 9.5 l metal reservoir. Available in 110v or 220v.PE4623-Way9584Advance Return +9.4
PE462 except has solenoid valve.PE462S3-Way9570Advance Return**9.4
PE462 except has "dump valve" - not for lifting.PE462A∞Auto/Dump 3-Way9610Advance Return9.4
Double Acting /
Multi Single Acting		PE462S except has 9590 double acting valve.PE4644-Way9500Advance Hold Return +9.4
PE462S except has 9592 double acting valve.PE464S3/4-Way9552Advance Return**9.4


Place an Enquiry

PE55 Series - 700 bar - CE Rated 110V & 220V

Up to 200 Ton. 900 cm3/min. Two Speed.

Heavy duty multiple-applications pump. Heavy construction and concrete stressing. Low voltage starting possible.

  • 0.48Kw, 12,000 rpm, 220 volt, 50 Hz universal motor; draws 25 amps at full load, starts at reduced voltage.
  • CSA rated for intermittent duty.
  • 3.1 m remote motor control (except PE552S which has a 7.6 m remote motor and valve control).
  • True unloading valve achieves greater pump efficiency, allowing higher flows at maximum pressure.
  • Reservoirs available in sizes up to 38 litres.
  • Light-weight and portable. Best weight to performance ratio of all Power Team pumps.
For use with Cyl. TypeDescriptionOrder No.Valve TypeValve No.Valve FunctionReservior (l)

Datasheet

** Holds with motor shut off.

† Valves have "Posi-Check®" feature.

†† Valving allows alternate and independent operation of two different spring return tools. Valve holds pressure only while valve is in "A" or "B" port position with pump motor shut off.

∞ Not to be used for lifting.

Control switch wired with line voltage. All remotes are 3.1m long except for PE552S which is 7.6m
Single-ActingBase model 0.84 KW pump with 9.5 l reservoir, remote motor control & 3-way valve. Available in 110v or 220v.PE5523-Way9582Advance Return**8.4
PE552 except also has solenoid operated remote valve.PE552S3-Way9570Advance Return8.4
PE552 except has "Auto Dump" valve.PE552A∞Auto/Dump9610Advance Hold Return8.4
0.84 KW pump with 9.5 l reservoir. Valve has "Posi-check" feature.PE5533-Way†9520Advance Hold Return8.4
Double Acting /
Multi Single Acting		Base model 0.84 KW pump with 9.5 l reservoir. and 4-way valve for double-acting systems.PE5544-Way†9506Advance Hold Return8.4
PE554 except has 9500 tandem center valve.PE554T4-Way9500Advance Hold Return8.4
For use with single-acting Spring Seat, Stressing Jack or double-acting cylinder.PE554P4-Way9500Advance Hold Return8.4
Power Seat, Stressing Jacks ONLY.PE554PT4-Way9628Advance Hold Return8.4
Pump suitable to run multiple Spring return cylindersPE554C4-Way9511 ††Advance Hold Return8.4
Pump equipped with 3/4-way solenoid valvePE554S3/4-Way9552Advance Hold Return8.4


Place an Enquiry

PQ120 Series - 700 bar - CE Rated 380V

Up to 400 Ton. 1600 cm3/min. Two Speed.

Low speed, high torque pump designed specifically for heavy duty, extended cycle operation. Ideal for press operation.

  • Pump prewired at factory with a 2.24 KW, 380 volt, 50 Hz. 3 Phase motor. Other electrical configurations are available upon request.
  • Start and operate under full load, even with voltage reduced 10%.
  • Electrical shut-down feature prevents unintentional restarting of motor following an electrical service interruption.
  • Internal relief valve limits pressure to 700 bar. External relief valve is adjustable from 70 to 700 bar.
  • 24 volt control circuits on units with remote controls for added user/operator safety.
  • Motor starter and heater element supplied as standard equipment.
  • Metal shroud keeps dirt and moisture out of motor and components.
  • Pumps operate below maximum OSHA noise limitation.
For use with Cyl. TypeDescriptionOrder No.Valve TypeValve No.Valve FunctionReservoir (l)

Datasheet

* Manual valve. Pump is equipped with RUN/OFF/PULSE switch for control of motor.

† Solenoid valve. Pump is equipped with a remote control switch with 3.1 m cord.

‡ Some Power Team pumps are available in special configurations not listed in this catalog. Power Team can "Assemble to Order" pumps with special seals, voltages, valves, relief valve settings, etc. For your special requirements please contact us.
Single Acting2.24 KW pump with 21.6 l reservoir and manual valve.PQ1203-E3803-Way9520 *Advance Hold Return20
PQ1203-E380, except has solenoid operated remote valve.PQ1203S-E3803-Way9599 †Advance Hold Return20
Double Acting2.24 KW pump with 21.6 l reservoir and manual valve.PQ1204-E3804-Way9506 *Advance Hold Return20
PQ1204-E380, except has solenoid operated remote valve.PQ1204S-E3804-Way9512 †Advance Hold Return20


Place an Enquiry

PE400 Series - 700 bar - CE Rated 380V

Up to 1000 Ton. 5600 cm3/min. Two Speed.

High tonnage double-acting cylinders, Single or multiple cylinder applications. Up to 1,000 Tons

  • Powered by a dual voltage 7.46 KW, 3 phase, 1,437 rpm motor
  • Two-speed high output pump delivers up to 16 l/min of oil.
  • Low noise level of 73-80 dBA.
  • Integral electrical shut-down feature prevents unintentional restarting of motor following an electrical service interruption.
  • Over-current protection prevents damage to the motor as a result of overheating.
  • "Stop" and "Start" control buttons are 24 volt.
  • PE4004 has a 4-way/3- position manual valve.
  • PE4004S has a 4-way/3-position solenoid valve with a 24v remote switch.
  • External pressure relief valve is adjustable from 100 to 700 bar.
  • Heavy duty 50.8 mm diameter casters assure easy manouvering.
  • 75.7 l (62.8 l usable) reservoir has a low oil level sight gauge.
  • 3 phase motor has all the electrical components necessary to operate the pump. The customer has no hidden charges when making purchase.
  • Deliver 16 l/min. of oil @ 15 bar, 5.6 l/min of oil @ 700 bar.
For use with Cyl. TypeDescriptionOrder No.Valve TypeValve No.Valve FunctionReservoir (l)

Datasheet

**Solenoid valve with remote control.

† Usable oil is calculated with oil fill at recommended level at 57 mm below cover plate.

†† PE400 series available in 220/380V, 50Hz and 460V, 50Hz.
Double-Acting7.46 KW pump with 75.5 l reservoir and manual valve.PE4004-E3804-Way9506Advance Hold Return62.8 †
PE4004 except has solenoid operated remote valve.PE4004S-E3804-Way9512 **Advance Hold Return62.8 †
John Doze

Just wanted to thank you for a very speedy service. I ordered 2 gas struts from you on the internet on Monday evening and received them Thursday morning in Spain, so was able to fit before lunch. Thanks again will recommend you to anyone here in Spain.

SGS Engineering UK Ltd, Unit A6 Cranmer Road, West Meadows Ind. Est., Derby, DE21 6JL, England.
Tel: 01332 226 290 Fax: 01332 290 514 Email: sales@sgs-engineering.com

Registered in England 05484978 | VAT No. 865 8689 49

Gas Struts
Hydraulic Jacks
Hydraulic Press
Hydraulics
Support
My Services
Business