Power Team Petrol Powered Hydraulic Pumps

PG303 and PG304 - 700 bar - Petrol Driven

• Powered by a 2-cycle, 1.5 kW Tecumseh engine giving it the lowest weight to horsepower ratio of all petrol driven pumps.
• Equipped with a roll cage to protect the pump from damage.
• Aluminum reservoir with 6 litres of usable oil.
• PG303 is for single-acting cylinders and has a 9520 valve with separate internal return line; allows oil from running pump to return to reservoir, independently of cylinder return oil, when valve is in "return" position.
• PG304 is for double-acting cylinders and has a 9506 4-way (tandem centre) valve.

PG553 and PG554 - 700 bar - Petrol Driven

• 4.5 kW Intek "Diamond Edge" 4-cycle, by Briggs & Stratton. 19 litre reservoir.
• PG553 has a 9520 3-way valve for single-acting cylinders.
• PG554 has a 9506 4-way valve for double-acting cylinders.

PG120/400 Series - 700 bar - Petrol Driven

Large reservoir capacity and roll cage equipped.

• Two-speed high performance pumps ideal for construction, structure moving and rigging applications.
• PG1200 Series pumps powered by a Honda 4-cycle, 5.5 hp engine with automatic decompression and electronic ignition. Delivers over 2.1 l/min of oil per minute at 700 bar.
• A 19 litre reservoir means adequate capacity for multi-cylinder applications. Dual element air cleaner protects engine from dusty environments.
• Heavy duty "roll cage" provides pick-up points for lifting. Horizontal bars on PG1203, PG1204 and PG1204S protect unit, provide hand holds for carrying.
• Rubber anti-skid insulation on bottom of reservoir resists skidding and dampens vibration. PG1200M-4 and PG1200M-4D include a pump cart with 305 mm wheels.
• Adjustable external pressure regulator.

PG1200M-4

• For single-acting cylinders. Has 9520 3-way/3-position (tandem centre) valve, 9596 load lowering valve and 9644 4-port manifold with individual needle valves at each port.
• Has a 9796 coupler and 9797 dust cap at each port. Valving permits precise individual control of up to four cylinders.
• A 9052 heavy duty, fluid filled pressure gauge (0-700 bar) is included.

PG1200M-4D

• For single- or double-acting cylinders with precise individual control of up to four cylinders possible.
• Equipped same as PG1200M-4, except has 9506 4-way/3-position (tandem centre) valve, and second 4-port manifold without needle valves mounted beneath 9644 manifold for operating double-acting cylinders.

PG400 Series Maximum output hydraulic power package

• Ideal for single or multiple cylinder applications. Has a 4-cycle, 15 kW Honda engine and 76 litre reservoir (63 litre usable) with low oil level sight gauge.
• Steel "roll cage" protects pump, has a lifting hook; 102 mm dia. swivel casters provide mobility.
• Delivers 6.4 l/min of oil at maximum operating pressure.
• Has a 9506 4-way valve. On/off switch and speed control are protected by a panel. Sturdy molded case protects battery (not included).