Hydraulic Workshop Press
Lifetime Marathon™ Warranty
Power Team's class-leading presses have a number of stand-out features, many of which provide a distinct edge over the competition.
Fifty per cent stronger than channel iron, the uprights are solid, whilst the four post design allows the easy loading of long material. The heavy duty presses have a full-rated capacity across the width of the upper frame, even when the work-head is moved to one side. A large work area is complemented by close manufacturing tolerance that gives even load distribution over four alloy steel pins.
25 Ton C Frame
Bench or pedestal mounted with 260, 387 or 514mm adjustable throat.
See all c-frame presses
10 Ton Bench Mounted
Bench mounted with 391mm throat and a Hand operated pump.
See all bench mounted presses
10-12 Ton H Frame
Floor standing with 127 to 1041mm Throat. Hand, Air and Electric Pumps.
See all 10 ton h-frame presses
20-30 Ton H Frame
Floor Standing with 127 to 1102mm Throat. Can be used as C or H frame.
See all 25 ton h-frame presses
50-55 Ton H Frame
Floor Standing, 152 to 1067mm Throat, Off centre pressing at full capacity.
See all 55 ton h-frame presses
100 Ton H Frame
Floor Standing, 51 to 1067mm Throat, Workhead glides accross upper frame.
See all 100 ton h-frame presses
150-200 Ton H Frame
Floor Standing, 51 to 1067mm Throat, Workhead glides accross upper frame.
See all 150-200 ton h-frame presses
Roll Bed Workshop Press
Floor Standing, 229 to 1626mm Throat, Easy unloading and loading.
See all roll bed presses
Power Team Hydraulic Press Features
- 2 To 1 Safety Factor on hydraulic cylinders and they meet ASME B30.1 standards. Cylinders are easily removed for other applications. Single or double-acting cylinders are available; built-in relief valve on double-acting cylinders.
- Full Rated Capacity across the width of upper frame, even with work-head moved to one side. (Heavy-duty presses only.)
- Larger Work Area than most competitors' models.
- Alignment Lever for simple pin replacement after raising or lowering the bed.
- Close Manufacturing Tolerance allows even load distribution over four alloy steel pins; not two, like some competitors. (Heavy-duty presses only.)
- Open Throat Feature on 25 ton press provides additional work area by mounting the cylinder on the outside for C-frame advantage.
- Frames Can Be Used Horizontally for pressing jobs on extra-long shafts.
- Electric, Air Or Hand Hydraulic Pumps are available. All are standard Power Team pumps. CE Rated electric pumps are standard on all presses. Externally adjustable relief valve for precise operator control of working pressure is standard on all electric pumps except PE10 and PE17 series. 24 volt hand switch for remote control on pumps equipped with solenoid valves.
- One-Man Operation for bed adjustment. Winch unit quickly raises or lowers bed to desired height. Self-locking winch mechanism prevents bed from dropping when handle is released.
- 3/8" I.D. Hose on spring return cylinders on heavy-duty presses provides up to six times faster cylinder return than standard 1/4" I.D. hose.
- Fast Cylinder Approach to work provided by 2-speed hand, air or electric pumps.
- Rugged Uprights, 50 percent stronger than channel iron. Four post design means open side for easy loading of long material.