SPX -> Bearing Maintenance -> Universal Puller
Universal Puller

Universal Puller

55 Ton & 100 TON "Enforcer 55" & Enforcer 100


email Place Enquiry | pdf Catalogue PDF

ENFORCER 55

  • 1 Hydraulic lift system for easy, precise position of puller.
  • 2 Unique dual pump arrangement: Low pressure pump positions, holds and opens jaws. The high pressure pump advances and retracts the pushing cylinder without releasing clamped jaws.
  • 3 Hydraulically-actuated jaws. Cylinder moves in or out to provide a safe, secure grip on workpiece.
  • 4 Puller can be assembled in 2 or 3 jaw configurations.
  • 5 Choice of cylinder with a 6 1/4" or 13 1/4" stroke.
  • 6 Self-centreing: Centre cylinder on work; puller jaws will automatically grip work evenly.
  • 7 Super Grip-O-Matic feature means the harder the pull, the tighter the puller jaws grip. No chains or cages required to keep puller jaws from slipping or springing off the part being pulled.
  • 8 Guards at pinch points protect operator.
  • 9 Cart's swivel casters give ease of mobility.
  • 10 Large wheels make movement of cart easy.
  • 11 Puller can be mounted on cart 90 degrees to right or left of puller cart centerline, permitting use in tight quarters, such as between machinery.

    • Conversion kit No. 251468 - Kit converts PH553C series to PH5532CL series. Jaws are 12" longer. Kit contains three jaws and six straps with guards. Wt., 250 lbs.

ENFORCER 100

  • 1 Adjustable jaws mean they always pull on a flat surface. Retaining chain holds jaws in place during positioning.
  • 2 Grip-O-Matic feature means jaws grip progressively tighter as more pulling force is applied.
  • 3 100 ton hydraulic cylinder is single-acting, spring return type with a maximum working pressure of 10,000 psi.
  • 4 Lifting bracket allows puller to be lifted if the workpiece centre is more than 36" off the floor.
  • 5 Adjusting screw allows operator to move vertical position of the puller.
  • 6 Spring loaded feature means Enforcer 100 will align itself on uneven pulls.
  • 7 Hydraulic pump is a 2-stage, high pressure unit controlled by remote hand switch with 25 foot cord.
  • 8 Tow bar provides puller with plenty of mobility.
  • 9 Pushing adapters have a diameter of 4 1/8" and 2 1/2".

Enforcer 100" universal puller

No. PH1002 - 100 ton, 2-jaw universal hydraulic puller. Includes: 2-jaw Grip-O-Matic puller, PE552S 2-speed electric/hydraulic power unit, C10010C 100 ton hydraulic cylinder with 10 1/4" stroke and six adapters. Wt., 890 lbs.
No. PH1002J - Same as PH1002, but without hydraulic power unit. Wt., 825 lbs. PE552S - Pump only. 1 1/8 hp, 115 volt, 50/60Hz, single phase, draws 25 amps at full load. Also available in 220 volt, 50Hz.
Note: For 220 volt, 50 Hz applications, order Part No. PH1002-220