Power Team Hydraulic Push Pullers

Made in USA
Power Team hydraulic push pullers
Power Team lifetime warranty
17½, 30-50 Ton

Previously difficult jobs made simple. Depending on how the puller is set up, a hydraulic pulling or pushing force can be applied. The stated tonnage capacity of each Push-Puller assumes use of the standard legs in tension. Capacity will be reduced if longer legs are used or the set-up sees the legs in compression. In every circumstance opt for the largest capacity puller/shortest legs suitable to do the job.

Features
  • Superb value for money. Push-Puller units have ideally matched hydraulic components that can be detached for other jobs providing optimum Power Team performance
  • Push-Puller with extra long or extra short reach enabled by optional leg kits
  • Power Team Push-Pullers can be used with an extensive array of bearing pulley attachments, internal pulling attachments and threaded adaptors
  • Power Twin® cylinder – Each Push-Puller is powered by a revolutionary centre-hole cylinder. The puller screw runs directly between the twin spring cylinder
  • Cylinder has a basic head design which enables you to change simply from a tapped hole to a plain hole
Capacity (Tons)Order NoDescriptionUse With
Datasheet
PPH17 hydraulic push pullers17½PPH17RT172 centre-hole Power Twin cylinder, cylinder half coupler, P55 pump, 9767 1,8 m. hose, 9798 hose half coupler, 419 mm legs, 24827 leg ends, 1"-8 x 508 mm lg. adjusting screw and adjusting crank.Bearing pulling attachments: Nos. 1124 and 1130. Pulley pulling attachment: No. 679. Internal pulling attachment: No. 1154. Legs: Nos. 1104, 1105, 1106, 1107 and 1108 - Pair of legs for 171/2-ton “capacity” Push-Puller®.
PPH17RSame as PPH17, but without P55 pump, 9767 1.8m hose and 9798 hose half coupler.
1062Puller only. (Cylinder, pump, hose, coupler, screw and crank not included.)
PPH30 hydraulic push pullers30PPH30RT302 centre-hole Power Twin cylinder, cylinder half coupler, P55 pump, 9767 1.8m hose, 9798 hose half coupler, 457 mm legs, 28390 leg ends, 11/4"-7 x 610 mm long adjusting screw and adjusting crank. Bearing pulling attachments. No. 680 (Use two 8012 adapters to connect to puller.) Pulley pulling attachment: No. 679. Internal pulling attachment: No. 1166. Legs: Nos. 1109, 1110.
PPH30RSame PPH30, but without P55 pump, 9767 1,8 m hose and 9798 hose half coupler.
1070Puller only. (Cylinder, pump, hose, coupler, screw and crank not included.)
PPH50 hydraulic push pullers50PPH50RT503 centre-hole Power Twin cylinder, cylinder half coupler, P55 pump, 9767 1.8 m hose, 9798 hose half coupler, 610 mm legs, 15/8"-5½ x 722 mm lg. adjusting screw and adjusting crank. Bearing pulling attachments: Nos. 1128 and 1129. Legs: Nos. 1112 and 1113 - Pair of legs for 50 ton “capacity” Push-Puller®.
PPH50RSame as PPH50, but without P55 pump, 9767 1.8 m hose and 9798 hose half coupler.
1076Puller only. (Cylinder, pump, hose, coupler, screw and crank not included.)
Hydraulic push puller legs
Hydraulic push puller product images
Hydraulic push puller application images
Assembling the tool for push or pulling force
  • Hydraulic Push Pullers
  • Starting at: £0.00