SPX -> Tools -> Punches
Punch

Hydraulic PUNCHES

20 & 35 Ton


email Place Enquiry | pdf Catalogue PDF

  • Punch smooth, precise holes in seconds; much faster than drilling.
  • Fully portable for construction, maintenance and service applications, or can be mounted on a workbench for production jobs. Has carrying handle for precise locating.
  • Rugged, forged steel "C" frame for great strength and durability.
  • Dual action, spring loaded stripper holds material during punching operation, strips material from punch on return. Scribe lines on stripper aid in locating the punch (HP 35 only).
  • Double Acting prevents binding and speeds retraction (HP20 only).
  • The PE172 electric/hydraulic pump is an ideal power source.

No. HP35 - Punch only, includes metal case and die change tools. Wt., 42.5 lbs.
No. HP35S - Punch with punches and dies. Includes HP35 punch, metal case and 250459 punch/die set. Wt., 44 lbs.
No. HP35P - Punch set with pump. Same as HP35SP, but does not include punch/die set. Wt., 86.3 lbs. NOTE: Available in 220 volt, 50 Hz. Order with suffix "-220".
No. HP35SP - Punch set with pump. Includes HP35 punch, PE172 electric/hydraulic pump, 9756 hose, 9798 hose half coupler, 250459 punch/die set, metal case. Wt., 87.8 lbs. NOTE: 220 volt, 50 Hz. Order with suffix "-220".
No. 250459 - Punch/die set for round holes. Includes one each: PD437 7/16 " punch/die, PD562 9/16 " punch/die, PD688 11/16" punch/die, PD812 13/16" punch/die. Wt., 1.5 lbs.
No. HP20 - Basic punch. Wt., 33 lbs.
No. HP20S - Punch frame with cylinder, valve, handle, two coupling nuts, plus five punch and die sets in 1/4", 5/16", 3/8", 7/16",and 17/32" dia. Wt., 35 lbs.
No. HP20SP* - Complete punch set with PE102AR pump (115V, 50/60 Hz), HP20HS hand switch, 9682 nipple, two 9792 female couplers and two 9793 male couplers. Also includes two 9758 10' hoses, 9680 coupling, and same punch and die sets as in HP20S (above). Tool is completely assembled and pre-filled with oil. In storage box. Wt., 83 lbs.

ACCESSORIES FOR HP20 HYDRAULIC PUNCH

No. HP20FS - Optional foot switch mounted in foot switch guard. Supplied with 10 foot cord and male remote connector. Wt., 2 lbs.
No. HP20HS - Replacement handswitch. Supplied with 10 foot cord and male remote connector. Wt., 2 lbs.
No. 252000 - Optional coupling nut wrench. Makes punch/die changes easier without "rounding- off" coupling nuts. Wt., 0.5 lbs.