SPX -> Tools -> Hydraulic Spreader
Hydraulic Spreader

Hydraulic Spreaders

1 - 1½ Ton


email Place Enquiry | pdf Catalogue PDF

It's a hydraulic pry bar!

  • Use to lift machines or as a clamp; spread concrete forms or rebar or perform straightening jobs.
  • Conforms to ASME B30.1 standard.
  • High strength alloy steel forged upper and lower jaws on HS2000.
  • Jaws are spring-return; retract auto-matically when pressure is released.

    • No. HS2000 - 1-ton capacity spreader. Full 2,000 lbs. capacity at 10,000 psi. with 4" spread. Can be "dead-ended" at 4" spread under full load. Needs only 9/16 " clearance to engage jaws.
    No. HS3000 - 1 1/2-ton capacity spreader. Full 3,000 lb. capacity at 10,000 psi. with 11 1/2" spread. Greater than competitive units. Needs only 1 1/4" clearance to engage jaws. Can be "dead-ended" at 11 1/2" spread at full load.