Search


pdf   Metric / Imperial
Last Updated:
17th March 2008
 

SPX pumps features:

  • Manual, electric, air, petrol & battery operated models.
  • Single & double acting manual & solenoid valves.
  • 700 Bar maximum working pressure.
  • CE approved Design.
  • All models available on "assemble to order" basis.
  • All pumps are fitted with relief valves pre set To 700 Bar.
  • Pumps can be used with variety of fluids; oil, water, etc.
  • Special pumps designed & manufactured for individual applications.

Valves Available for pumps:

  • Load lowering valve
  • Sequence valve
  • Pressure reducing valve
  • Shut-off valve
  • Check valve
  • Pressure relief valve
  • Metering valve
  • Pressure regulator valve
  • Relief valve
SPX -> Pumps

High Performance Pumps

Compact, light weight and durable pumps perfectly suited for powering cylinders and hydraulic tools.

Please browse our catalogue for the full range of Power Team Pumps and 700 bar equipment or alternatively please contact us for more information or assistance.

Click here for help choosing the right pump

Hand Pumps Cylinder & Pump Sets Air Hydraulic Battery Hydraulic Electric Hydraulic
Electric Crimping Gas Crimping Gas Hydraulic Hydraulic Intensifer Booster
Assemble to Order Accessories Choosing the right pump


MANUALLY-OPERATED HYDRAULIC PUMPS:

P12, P23, P55 - These single-speed pumps are for use with single-acting cylinders.

P19, P59, P59F, P157, P159, P300, P460 - These 2-speed pumps are used with single-acting cylinders. The 2-speed feature provides high oil volume for fast cylinder piston approach to the work; pump automatically shifts to the high pressure stage. This reduces the number of pump handle strokes required.

P157D, P159D, P300D, P460D - These 2-speed pumps are used with double-acting cylinders.

AIR/HYDRAULIC PUMPS

Used where air is the preferred energy source or where electricity is not available. Ideal for use in petrochemical, mines or other inflammable or explosive environments.

PA6 Series - These single-speed pumps drive single- or double-acting cylinders.

PA9 Series - These new single-speed pumps drive single-acting cylinders and are ideal for powering portable hydraulic tools.

PA50 Series - These single-speed pumps drive single- or double-acting low pressure (3,200 psi) cylinders.

PA60 - This 2-speed pump is equipped with a manifold to operate multiple cylinders, and provides a 2-gallon reservoir capacity.

PA64 - Similar to PA60, this 2-speed pump drives single-or double-acting cylinders.

PA172 and PA174 - These "economy" 2-speed pumps drive single- or double-acting cylinders, depending on the model chosen. Provide a low weight to output ratio.

PA462 and PA464 Series - These 2-speed pumps drive single or double-acting cylinders, depending on the model selected. They offer high speed cylinder piston advance.

PA554 - This 2-speed pump drives single- or double-acting cylinders, delivering a high volume of oil.

ELECTRIC/HYDRAULIC PUMPS

All of the following pumps are 2-speed models, and can be used to drive single- or double-acting cylinders.

"Quarter Horse" Series - As their name implies, these pumps feature a 1/4 hp electric motor. A battery-powered version is available. Having a low noise level and weighing just 20 lbs., they are ideal for powering portable hydraulic spreaders, nut splitters, pipe flange spreaders and other tools.

PE17 Series - CSA rated for intermittent duty, these feature a 1/2 hp, single phase induction motor with a low noise level (67-81 dBA). Smaller generators and low amperage circuits can be used as a power source.

PE46 Series - Powered by a 1 1/2 hp, single phase induction motor, operate at a moderate noise level of 77-81 dBA. CSA rated for intermittent duty.

PE18 Series - CSA rated for intermittent duty, these feature a 1/2 hp, single phase universal motor with a noise level of 85-90 dBA. Provide high performance at a low price. Has low amperage draw.

PE30 Series - Equipped with a 1 hp, single phase permanent magnet motor, have a noise level of only 82-87 dBA. CSA rated for intermittent duty, and require a relatively low voltage; ideal for use in general construction applications. Roll cage/handle protects the motor and controls.

PE55 and PED25 Series - The famous Vanguard pumps have been continually upgraded for 40 years; some of the originals are still in service! Equipped with a 1 1/8 hp, single phase universal motor, have a high noise level (90-95 dBA). Offer the best weight to performance ratio of any Power Team electric/hydraulic pump. CSA rated for intermittent duty.

The PED25 versions are "dual flow" pumps which deliver the same low and high pressures to both valves, and have a noise level of 80-85 dBA. They have a 1 1/2 hp induction motor.

PE60 Series - The Vanguard Supreme pumps provide trouble-free service in the most severe working environments. Powered by a 1 1/8 hp, single phase motor, has a moderate noise level of 80-85 dBA. Start well under load even at the reduced voltages encountered on construction sites. High-output pumps, ideal for use with post-tensioning/pre-stressing jacks and other high-pressure hydraulic tools.

"Custom-built" pumps - Power Team offers you "assemble to order" electric/hydraulic pumps to suit unique applications. You can choose from pre-engineered, off the-shelf components to customize your pump.

PE21 Series - Ideal for heavy-duty, extended-cycle applications. Powered by a 1hp, single phase motor, pump operates a very low noise level of 70 dBA. Pump automatically shuts down in the event of a power failure. CSA rated for intermittent duty.

"Quiet" Pumps. Our PQ60 and PQ120 series operate at a very low noise level of between 73-78 dBA. The PQ60 has a 2 hp (single phase) motor; the PQ120 has a 3 hp (3-phase) motor. These pumps are designed for heavy-duty, extended cycle operations. CSA rated for intermittent duty.

PE400 Series - High-flow units deliver a large volume of high pressure oil for heavy construction and maintenance operations employing high tonnage cylinders. The PE400 is powered by a 10 hp, 3-phase motor. Low noise rating of 73-80 dBA.

GASOLINE-DRIVEN HYDRAULIC PUMPS

These two-speed pumps are ideal for use in remote applications, such as construction sites. May be used with single- or double-acting cylinders.

PG30 Series - Powered by a 2-cycle, 2 hp Tecumseh engine, these have an integral, protective "roll cage" and adequate reservoir capacity for cylinders up to 100 tons capacity or more. Readily portable; popular in the railroad, rescue and construction markets.

PG55 Series - With a 4-cycle, 4 hp Briggs & Stratton engine, this pump is based on our popular Vanguard Series. It has a generous five gallon reservoir capacity.

PG120 Series - Powered by a 4-cycle, 5.5 hp Honda engine. Has a five gallon reservoir; capable of handling multiple-cylinder lifting tasks. Ideal for the structure moving, pier setting, bridge lifting and concrete contracting industries.

PG4004 - Featuring a 4-cycle, 18 hp Briggs & Stratton engine, this unit has a big 20 gallon reservoir. Rugged steel "roll cage" has a hook on top and swivel casters for ease of mobility. Popular for concrete stressing applications.

HYDRAULIC INTENSIFIER

HB Series - Turns low pressure hydraulic pumps into high pressure power sources to operate single-acting or double-acting cylinders and tools such as crimpers, spreaders, cutters, etc. Compact and portable for use inside a utility vehicle aerial bucket or stowing in a vehicle.