SPX -> Pumps -> Gas Hydraulic

Petrol Hydraulic Pump PG30/55 Series

30-55 cu. in./min. - Gasoline driven, Two Speed, Single and Double Acting

Gasoline power supply ideal for remote locations. PG30 series for to 75 ton cylinders. PG55 series for up to 150 ton cylinders.

A logical choice at work sites where electricity or compressed air are unavailable.
For single- or double-acting cylinders at operating pressures to 10,000 psi.
All gasoline engine/hydraulic pumps feature "Posi-Check" valve to guard against pressure loss when valve is shifted from "advance" to "hold".

PG303 and PG304

Powered by a 2-cycle, 2 hp Tecumseh engine giving it the lowest weight to horsepower ratio of all gasoline driven pumps. Has an aluminum reservoir with 375 cu. in. of usable oil.
Has same basic pump as PE30 series electric operated pumps.
PG30 series pumps are equipped with roll cages to protect pump from damage.
PG30 series pumps weigh in at only 32 lbs. with oil.
PG303 is for single-acting cylinders, has a 9520 valve with separate internal return line; allows oil from running pump to return to reservoir, independently of cylinder return oil, when valve is in "return" position.
PG304 is for double-acting cylinders, has a 9506 4-way (tandem center) valve.

PG553 and PG554

6 hp Intek "Diamond Edge" 4-cycle, by Briggs & Stratton. 5 gallon reservoir.
Same basic pump as PE55 series electrical Vanguard pumps.
PG553 has a 9520 3-way valve for single-acting cylinders.
PG554 has a 9506 4-way valve for double-acting cylinders.

130-400 cu. in./min. - Max.output gasoline powered pumps. Two Speed, Single and Single/Double Acting.

Place Enquiry

Catalogue PDF

Large reservoir capacity roll cage equipped. PG120 for up to 300 ton cylinders. PG400 for up to 1,000 ton cylinders.

Two-speed high performance pumps ideal for construction, structure moving and rigging applications.

A logical choice at work sites where electricity or compressed air are unavailable.

For single- or double-acting cylinders at operating pressures to 10,000 psi.

All gasoline engine/hydraulic pumps feature "Posi-Check" valve to guard against pressure loss when valve is shifted from "advance" to "hold".

PG1200 Series pumps powered by a Honda 4-cycle, 5.5 hp engine with automatic decompression and electronic ignition. Deliver over 1/2 gallon (130 cu. in.) of oil per minute at 10,000 psi.

A 5 gallon reservoir means adequate capacity for multi-cylinder applications. Dual element air cleaner protects engine from dusty environments.

Heavy duty "roll cage" provides pick-up points for lifting. Horizontal bars on PG1203, PG1204 and PG1204S protect unit, provide hand holds for carrying.

Rubber anti-skid insulation on bottom of reservoir resists skidding and dampens vibration. PG1200M-4 and PG1200M-4D include a pump cart with 12" wheels.

Adjustable external pressure regulator.

PG1200M-4

For single-acting cylinders. Has 9520 3-way/3-position (tandem center) valve, 9596 load lowering valve and 9644 4-port manifold with individual needle valves at each port.

Has a 9796 coupler and 9797 dust cap at each port. Valving permits precise individual control of up to four cylinders.

A 9052 heavy duty, fluid filled pressure gauge (0-10,000 psi) is included.

PG1200M-4D

For single- or double-acting cylinders with precise individual control of up to four cylinders possible.

Equipped same as PG1200M-4, except has 9506 4-way/3-position (tandem center) valve, and second 4-port manifold without needle valves mounted beneath 9644 manifold for operating double-acting cylinders.

PG400 Series Maximum output hydraulic power package

Ideal for single or multiple cylinder applications. Has a 4-cycle, 20 hp Honda engine and 20 gallon reservoir (17 gallons usable) with low oil level sight gauge.

Steel "roll cage" protects pump, has a lifting hook; 4" dia. swivel casters provide mobility.

Delivers 400 cu. in. of oil at maximum operating pressure.

Has a 9506 4-way valve. On/off switch and speed control are protected by a panel. Sturdy molded case protects battery (not included).

Search