The SGS 100 litre air compressor comes with a ratchet wrench and impact wrench, as well as the hoses, filter/regulator/lubricator and fittings required to start using the tools straight away. The compressor has an impressive 14.6 CFM air displacement and large 100-litre tank, enabling the use of the impact wrench without waiting for the tank to fill. It offers a fantastic combination of performance, safety and value for money.

	The powerful 3 HP motor is capable of delivering up to 14.6 CFM.
	The 100 litre tank is ideal for spraying, nailing, stapling, sanding, drilling and cutting.
	Boasting twin outlets, this compressor can have two tools connected to it at once.

Also included are all the hoses, accessories and fittings needed to start using the compressor with the air tool of your choice. The Ratchet Kit is fully CE approved and, as with all SGS Engineering tools, offers the very best in safety and quality. This 17 piece set contains the 1/2" air impact ratchet wrench, which has been designed for easy and comfortable use with a tough rubber grip, along with a 3/8" ratchet wrench. Includes 9, 10, 11, 13, 14, 17 and 19mm sockets, 1/2" to 3/4" adaptor and a mini oiler.

Please note this compressor is for semi-pro and not commercial use.

Air Outlet: 1/4" BSP to Euro Coupler. The fitting can be swapped for PCL fittings, please check Fitting & Couplers section.

Included:

100L air compressor 
1/2"Air Impact & 3/8" Ratchet Wrench
10m Long, 8mm Diameter Rubber Hose With Quick Couplers
Euro quick couplers
Compressor oil 
Airline oil
Air Filter, Water Trap, Regulator & Lubricator 

The large air tank makes this compressor suitable for tools that require a constant supply of air, such as spray guns, impact wrenches and drills. The powerful 3 HP engine ensures a short wait for the tank to pressurise - keeping you working. Fitted with safety valve and pressure regulator with gauges for controlled air pressure. Twin air outlets for increased versatility allow two air-lines / tools to be connected at the same time.

Fitted with euro quick release connectors. SGS are a British company with full spares, warranty and service centre based in our East Midlands HQ. Our air compressors are hand built by our expert engineers to the highest standard of quality and are European CE marked and German GS certified for product safety. The compressor is shipped with oil but may require additional oil before first use. 

Covered by a 2 year extended warranty.

Due to a change in EU legislation the safety valve rings have been removed by ALL manufacturers of air compressors. This is due to the ring being incorrectly used to vent the compressor, causing undue wear which should not be present on a safety device. The air should drained from the tank via the valve on the belly of the tank. This location is used so that the water is drained at the same time.