Power Team 1076 50 Ton Hydraulic Push-Puller

The power to make impossible jobs become routine. 50 ton capacity push-puller only. (Cylinder, pump, hose, coupler, screw and crank not included.) A wide variety of optional legs, threaded adapters, bearing pulling attachments and internal pulling attachments can be used in combination with our Push-Pullers®.

Selection and Capacity Rating
Each Push-Puller’s specified tonnage “capacity” is determined using its standard legs in tension. Using longer legs, or a setup in which the legs are in compression, will reduce the “capacity”. Always select the largest “capacity” puller and the shortest legs that will fit the job.

Power Twin® Cylinder
This unique center-hole cylinder powers each Push-Puller®. Puller screw runs right between the twin spring cylinder. A basic head allows you to change from a tapped hole to a plain hole by merely changing the head insert.

Use With:
1112 Puller Legs
1113 Puller Legs
1128 Bearing Pulling Attachment
Pair of puller legs for 50 ton “capacity” Push-Puller®.

Leg Ends are threaded 1 1/4"-12 x 1 3/4" lg.