Power Team 9042DG 9042DG General Purpose Digital Gauge

The SPX FLOW 9042DG general purpose digital gauge is easier to read and offers better accuracy* than a conventional analog gauge. The laser-welded stainless steel sensor & socket, and the IP67 weatherproof rating make this product suitable for use in even the most demanding of applications.

Five pre-programmed engineering units allow technicians to read pressure in the unit of measure most applicable to the process. The gauge also features a bar graph display to help understand how quickly the pressure is changing.

The 9042DG comes standard with many useful functions, including automatic off (battery conservation), pressure tare, minimum pressure memory and maximum pressure memory.

The gauges are calibrated for life at the factory.

FEATURES:
Backlight and large 0.48 in. (12.2 mm) tall numbers for easy reading
Weatherproof IP67 enclosure
Protective rubber boot
Displays in multiple engineering units: psi, bar, mPa, kPa, inHg, cmHg, mmHg, kg/cm2, ft H20
Typical Cycle Life: 10,000,000 cycles
Long 2,000-hour life with two standard AA (LR6) batteries
Vibration & Shock tested to MIL-STD-202G
Agency Compliance/Approval: RoHS, CE, ASME B40.7, UL, cUL 61010-1

Specifications:
Face Diameter (mm): 63.5
Rated Pressure (bar): 0-700
Temp Range (°C): -20° to +60°

* Accuracy is 0.5% Full Scale, including the effects of linearity, hysteresis, and repeatability.

Typical Setup
In order to determine required hardware:
1. Does your pump have 3/8" or 1/4" mounting holes?
2. Choose your coupler size. (use 1/4" for torque wrench pumps and 3/8" for all others)
3. Use the diagrams as a guideline to select the necessary fittings.