Fitting the chain brake casing to your SGS chainsaw can be a little bit fiddly. This quick how-to should help if you're having any problems assembling your chainsaw. Scroll through the picture how-to above and follow the instructions.
We also have a video assembly guide for you SGS chainsaw here.
1. Hold the break piece between your feet and firmly pull the brake backwards.
2. The arrow shows the notch (A) where the hole for the tensioning pin (B) is located on the chain bar.
3. The tensioning pin (B) in the inside of the chain brake cover needs to be lined up with the notch (A).
4. This is roughly the position the tensioning pin (B) should be in to mate the chain brake with the notch (A) on the bar.