Makita DLX2283TJ 18V Combi Drill and Impact Driver Kit - 2x 5Ah Batteries, Charger and Carry Case

This brushless kit is made up of the Makita DHP485 Combi Drill and the Makita DTD153 Impact Driver. Also packed in the Makpac Type 3 Carry Case are 2x 5.0Ah superior run time lithium-ion batteries, a DC18RC quick charger, a pair of belt clips and a double ended driver bit.

DHP485 18V 2-Speed Combi Drill

Features:
- eXtreme Protection Technology (XPT) offers maximum protection against dust, debris and liquids for optimal performance in extreme conditions
- Forward & Reverse
- Battery protection system provides over-discharge, temperature and circuit protection for enhanced performance, battery cycle life and overall battery life
- 21 clutch settings deliver up to 50Nm of torque
- All metal gears and gear housing for more efficient power transmission
- Ultra-compact design (only 182mm long)
- Dual LED job lights with pre-glow and afterglow features
- Improved ergonomic soft rubber grip design for vibration absorption and comfortable operation features re-contoured rear grip portion and ribbed grip for improved hold
- 13mm Keyless chuck – for easy bit installation/ removal by one hand

Specification:
- Voltage: 18v Li-Ion
- Impact Rate Low/High: 0-7,500/0-28,500 ipm
- Max Drill Masonry: 13 mm
- Max Drill Steel: 13 mm
- Max Drill Wood: 38 mm
- No Load Speed Low/High: 0-500/0-1,900 rpm
- Blows per Minute Low/High: 0-7,500/0-28,500 bpm
- Max Tightening Torque Hard/Soft: 50/27 Nm
- Overall Length: 182 mm
- Net Weight: 1.5-1.8 kg

Noise & Vibration:
- Vibration Level: 8.0 m/s2
- Noise Level: 82 dB(A)
- Uncertainty (K): 1.5 m/s2
- Work Mode: Drilling into Metal
- Uncertainty (K): 1.5 m/s2
- Sound Power Level (LWA) : 93 dB(A)
- Uncertainty (K): 3 dB(A)
- DTD153 18v Impact Driver

Features:
- eXtreme Protection Technology (XPT) offers maximum protection against dust, debris and liquids for optimal performance in extreme conditions
- Compact design with an overall length of only 126mm
- One touch sliding chuck for easy bit installation and removal
- Brushless DC motor with high power to weight and size ratio
- Brushless DC motor generates less heat buildup and is ideal for prolonged use in manufacturing / production applications
- Battery protection system provides over-discharge, temperature and current protection for enhanced performance, battery cycle life and overall battery life
- LED job light with pre-glow
- Ergonomic soft rubber grip design for vibration absorption and comfortable operation

Specifications:
- Voltage: 18v
- Max Torque: 170 Nm
- Brake Type: Electric
- LED Job Light: Yes / Pre-glow
- Battery Capacity Indicator: No
- Battery Compatibility: 18v Lithium-Ion (LXT)
- Rotation: Forward & Reverse
- Variable Speed Control Trigger: Yes
- No Load Speed: 0-3400 rpm
- Machine Screw Capacity: M4-M8
- Standard Bolt Capacity: M5-M16
- High Tensile Bolt Capacity: M5-M14
- Coarse Thread Length Capacity: 22-125 mm
- Max Impacts per Minute: 0-3600 ipm
- Driving Shank: 1/4" Hex
- Overall Length: 126 mm
- Net Weight (with 1.5/2Ah Battery): 1.3 kg
- Net Weight (with 3/4/5Ah Battery): 1.5 kg
- Brushless Motor: Yes