What a fantastic piece of kit. Use an engine hoist to load and unload it and cannot wait to use it.
Great packaging and versatility
SAVE
£144.99
Description
Specification
Product Manual
Product Reviews
Q&A
This superb dual voltage, 6500 W petrol powered generator from SGS Engineering provides a very reliable source of electrical power for light trade and domestic uses including powering remote lighting, pressure washers, power tools, compressors and water pumps. The large 6.5kW output is suitable for many backup and standby power requirements.
The SPG6500 delivers up to 6.5 kW or 8.1 kVA of power from a 16 amp 115 V socket, 32 amp 115 V socket or a 32 amp 230 V socket, and in addition has a 12V DC 8.3amp output.
All our generators come with 100% copper motor coils instead of the more commonly used (and cheaper) aluminium coils found on other models. This ensures a greater and more reliable power output from SGS generators.
It is fitted with an extra large 25 litre fuel tank for up to 10 hours continuous operation between refuelling, is powered by a reliable electric start 4-stroke petrol engine and is protected by a sturdy all steel surround frame fitted with large rubber wheels for maneuverability.
Fitted with an AVR (automatic voltage regulator) to sense and maintain a constant voltage as the load on the generator varies.
Tips on ordering the correct generator:
It is recommended to leave 20-25% headroom when ordering a generator. So a 1000W kettle should be run on a 1200W generator, to help extend the life of the generator.
Resistive and inductive loads:
A generator can be used for two types of loads – resistive and inductive. A resistive load has no moving parts and no start-up power requirement – for example kettles, light bulbs and heaters. An inductive load applies to most items with a moving part – for example motors, air compressors, power washers, drills and hoovers. Items with an inductive load require three times their rated wattage at start-up. So a 1000W drill would need up to 3000W at start-up.
NOTE: The generator will require filling with 1.1 litres of 10W30 grade oil before first use.
NOTE: This generator will require both our 32 amp to 16 amp and a 16 amp to 13 amp fly leads for use with a standard 3 pin plug.
This product comes with 2 year extended warranty.
The SPG6500 delivers up to 6.5 kW or 8.1 kVA of power from a 16 amp 115 V socket, 32 amp 115 V socket or a 32 amp 230 V socket, and in addition has a 12V DC 8.3amp output.
All our generators come with 100% copper motor coils instead of the more commonly used (and cheaper) aluminium coils found on other models. This ensures a greater and more reliable power output from SGS generators.
It is fitted with an extra large 25 litre fuel tank for up to 10 hours continuous operation between refuelling, is powered by a reliable electric start 4-stroke petrol engine and is protected by a sturdy all steel surround frame fitted with large rubber wheels for maneuverability.
Fitted with an AVR (automatic voltage regulator) to sense and maintain a constant voltage as the load on the generator varies.
Tips on ordering the correct generator:
It is recommended to leave 20-25% headroom when ordering a generator. So a 1000W kettle should be run on a 1200W generator, to help extend the life of the generator.
Resistive and inductive loads:
A generator can be used for two types of loads – resistive and inductive. A resistive load has no moving parts and no start-up power requirement – for example kettles, light bulbs and heaters. An inductive load applies to most items with a moving part – for example motors, air compressors, power washers, drills and hoovers. Items with an inductive load require three times their rated wattage at start-up. So a 1000W drill would need up to 3000W at start-up.
NOTE: The generator will require filling with 1.1 litres of 10W30 grade oil before first use.
NOTE: This generator will require both our 32 amp to 16 amp and a 16 amp to 13 amp fly leads for use with a standard 3 pin plug.
This product comes with 2 year extended warranty.

Part Number | PGH6500 |
---|---|
Display Weight | 98 |
Warranty | 2 Year Warranty |
Brand | SGS |
Power Phase | Single Phase |
Max Power Output (W) | 6,500 W |
Tank Size | 25 Litres |
Sound Level | 69 dB |
Rated Output (Watts) | 6,000 W |
Engine Type | 4-Stroke Engine |
Engine RPM | 3000 RPM |
Engine HP | 15 HP |
Run Time | 10 Hours @ 50% Load |
Output Sockets | 115V 16A, 115V 32A, 230V 32A |
Dimensions | L690 x W540 x H570 |
Product Manuals
Leave a Review
Reviews
-
Price Delivery Quality Review by Ben(Posted on 23/01/2019)8.1 kVA Heavy Duty Portable Petrol Generator With Electric Start & Wheels -
Price Delivery Quality Review by ANDREW KEMP(Posted on 08/10/2018)GeneratorExcellent service & product -
Quality Price Delivery Review by LEANDRO PAGANO(Posted on 21/09/2018)good custumer servicesquick delivere and good custumer services -
Price Delivery Quality Review by Lester Perkins(Posted on 03/09/2018)good service as usual -
Quality Price Delivery Review by Ray Newland(Posted on 30/08/2018)i have got an sgs 8.5kva generatori have got an sgs 8.5kva generator and i think it is the best machine of its size that i have used. the back up service is second to none all the correspondence with the team is painless and they all are very helpfull. i would recomend the to anyone and its keeping british enginering alive thank you for a great product and great custumer service , ray newland
Write a review
Product Description
This superb dual voltage, 6500 W petrol powered generator from SGS Engineering provides a very reliable source of electrical power for light trade and domestic uses including powering remote lighting, pressure washers, power tools, compressors and water pumps. The large 6.5kW output is suitable for many backup and standby power requirements.
The SPG6500 delivers up to 6.5 kW or 8.1 kVA of power from a 16 amp 115 V socket, 32 amp 115 V socket or a 32 amp 230 V socket, and in addition has a 12V DC 8.3amp output.
All our generators come with 100% copper motor coils instead of the more commonly used (and cheaper) aluminium coils found on other models. This ensures a greater and more reliable power output from SGS generators.
It is fitted with an extra large 25 litre fuel tank for up to 10 hours continuous operation between refuelling, is powered by a reliable electric start 4-stroke petrol engine and is protected by a sturdy all steel surround frame fitted with large rubber wheels for maneuverability.
Fitted with an AVR (automatic voltage regulator) to sense and maintain a constant voltage as the load on the generator varies.
Tips on ordering the correct generator:
It is recommended to leave 20-25% headroom when ordering a generator. So a 1000W kettle should be run on a 1200W generator, to help extend the life of the generator.
Resistive and inductive loads:
A generator can be used for two types of loads – resistive and inductive. A resistive load has no moving parts and no start-up power requirement – for example kettles, light bulbs and heaters. An inductive load applies to most items with a moving part – for example motors, air compressors, power washers, drills and hoovers. Items with an inductive load require three times their rated wattage at start-up. So a 1000W drill would need up to 3000W at start-up.
NOTE: The generator will require filling with 1.1 litres of 10W30 grade oil before first use.
NOTE: This generator will require both our 32 amp to 16 amp and a 16 amp to 13 amp fly leads for use with a standard 3 pin plug.
This product comes with 2 year extended warranty.
The SPG6500 delivers up to 6.5 kW or 8.1 kVA of power from a 16 amp 115 V socket, 32 amp 115 V socket or a 32 amp 230 V socket, and in addition has a 12V DC 8.3amp output.
All our generators come with 100% copper motor coils instead of the more commonly used (and cheaper) aluminium coils found on other models. This ensures a greater and more reliable power output from SGS generators.
It is fitted with an extra large 25 litre fuel tank for up to 10 hours continuous operation between refuelling, is powered by a reliable electric start 4-stroke petrol engine and is protected by a sturdy all steel surround frame fitted with large rubber wheels for maneuverability.
Fitted with an AVR (automatic voltage regulator) to sense and maintain a constant voltage as the load on the generator varies.
Tips on ordering the correct generator:
It is recommended to leave 20-25% headroom when ordering a generator. So a 1000W kettle should be run on a 1200W generator, to help extend the life of the generator.
Resistive and inductive loads:
A generator can be used for two types of loads – resistive and inductive. A resistive load has no moving parts and no start-up power requirement – for example kettles, light bulbs and heaters. An inductive load applies to most items with a moving part – for example motors, air compressors, power washers, drills and hoovers. Items with an inductive load require three times their rated wattage at start-up. So a 1000W drill would need up to 3000W at start-up.
NOTE: The generator will require filling with 1.1 litres of 10W30 grade oil before first use.
NOTE: This generator will require both our 32 amp to 16 amp and a 16 amp to 13 amp fly leads for use with a standard 3 pin plug.
This product comes with 2 year extended warranty.

Technical Specification
Part Number | PGH6500 |
---|---|
Display Weight | 98 |
Warranty | 2 Year Warranty |
Brand | SGS |
Power Phase | Single Phase |
Max Power Output (W) | 6,500 W |
Tank Size | 25 Litres |
Sound Level | 69 dB |
Rated Output (Watts) | 6,000 W |
Engine Type | 4-Stroke Engine |
Engine RPM | 3000 RPM |
Engine HP | 15 HP |
Run Time | 10 Hours @ 50% Load |
Output Sockets | 115V 16A, 115V 32A, 230V 32A |
Dimensions | L690 x W540 x H570 |
Product Manual
Product Reviews
Leave a Review
Reviews
-
Price Delivery Quality Review by Ben(Posted on 23/01/2019)8.1 kVA Heavy Duty Portable Petrol Generator With Electric Start & WheelsWhat a fantastic piece of kit. Use an engine hoist to load and unload it and cannot wait to use it.
Great packaging and versatility -
Price Delivery Quality Review by ANDREW KEMP(Posted on 08/10/2018)GeneratorExcellent service & product -
Quality Price Delivery Review by LEANDRO PAGANO(Posted on 21/09/2018)good custumer servicesquick delivere and good custumer services -
Price Delivery Quality Review by Lester Perkins(Posted on 03/09/2018)good service as usual -
Quality Price Delivery Review by Ray Newland(Posted on 30/08/2018)i have got an sgs 8.5kva generatori have got an sgs 8.5kva generator and i think it is the best machine of its size that i have used. the back up service is second to none all the correspondence with the team is painless and they all are very helpfull. i would recomend the to anyone and its keeping british enginering alive thank you for a great product and great custumer service , ray newland
Write a review
Q&A