SGS 3.75 kVA Super Duty Portable Petrol Generator With Wheel Kit | 4-Stroke 7.0 HP

This superb dual voltage, 3000 W petrol powered generator from SGS Engineering not only offers exceptional value for money but also and suits a wide range of users who demand a reliable source of remote, portable electricity. Ideal for most standby or backup power requirements. The PGH3000 delivers up to 3.0 kW / 3.75 kVA of power to light trade, domestic and leisure users. 115 V 16 amp socket and a 230 V 16 amp socket, and in addition has a 12V DC 8.3amp output. All our generators come with 100% copper motor coils instead of the more commonly used (and cheaper) aluminium coils found on other models. This ensures a greater and more reliable power output from SGS generators. It is fitted with a large fuel tank for up to 8 hours continuous operation @ 50% load between refuelling, is powered by a reliable and easy to start 4-stroke petrol engine and is protected by a sturdy all steel surround frame fitted with large rubber wheels for manoeuvrability. Fitted with an AVR (automatic voltage regulator) to sense and maintain a constant voltage as the load on the generator varies. Tips on ordering the correct generator: It is recommended to leave 20-25% headroom when ordering a generator. So a 1000W kettle should be run on a 1200W generator, to help extend the life of the generator. Resistive and inductive loads: A generator can be used for two types of loads – resistive and inductive. A resistive load has no moving parts and no start-up power requirement – for example kettles, light bulbs and heaters. An inductive load applies to most items with a moving part – for example motors, air compressors, power washers, drills and hoovers. Items with an inductive load require three times their rated wattage at start-up. So a 1000W drill would need up to 3000W at start-up. NOTE: The generator will require filling with 0.6 litres of 10W30 grade oil before first use. This product comes with 2 year extended warranty.