Trend Router Bits

Filter
-
Trend SET/SS11X1/4TC 6pc starter cutter set - 1/4 Shank
- Three non-bearing cutters
- Carbide brazed cutting tips
- Durable plastic storage case
-
Trend SET/SS31X1/4TC 30 Piece Starter Cutter Set - 1/4 Shank
- 30 pc
- 1/4-inch shank diameter
- Supplied in aluminium carry case
-
Trend SET/SS35X1/2TC 35 piece starter cutter set - 1/2 Shank
- 35 pc
- 1/2-inch shank diameter
- Supplied in aluminium carry case
-
Trend SET/SS50X1/4TC - 50 Piece 1/4 Shank Router Cutter Set
- 50 pc
- 1/4-inch shank diameter
- Supplied in aluminium carry case
-
Trend TR37X1/2TC Two flute cutter 12mm diameter - 1/2 Shank
- For housing, grooving and mortising
- Clean finish to abrasive materials
- PTFE coated
-
Trend TR29X1/4TC Guided profiler - 1/4 Shank
- 2mm micrograin Tungsten Carbide tips
- Clean finish to abrasive materials
- PTFE coated
-
TR09X1/4TC Two flute cutter 10mm diameter - 1/4 Shank
- 2mm micrograin Tungsten Carbide tips
- Clean finish to abrasive materials
- PTFE coated
-
Trend T46/0X1/4TC Trimming cutter 9.5 mm diameter - 1/4 Shank
- For trimming and bevelling timber
- 9.5 mm diameter
- Self-guiding trimmer
-
Trend T46/04X1/4TC Trimming cutter 12.7 mm diameter - 1/4 Shank
- For trimming and bevelling timber
- 12.7 mm diameter
- Self-guiding trimmer
-
Trend Snappy SNAP/QC Quick Chuck with 3/8 Hex Shank
- Compact profile for small spaces
- Quick swap accessories
- Long life performance
-
Trend T46/01X1/2TC Guided 90 degree trimmer 12.7 mm diameter 25mm length - 1/2 Shank
- Self-guiding trimmer
- 3mm approximate overlap
- Trimming plastic or plywood overlay
-
Trend S3/21X1/4STC Two flute cutter 6.3mm diameter - 1/4 Shank
- Ultra solid
- Two-flute design
- Stronger than standard TCT cutters
-
Trend RT/13X1/2TC Rota-Tip straight 12.7 mm diameter - 1/2 Shank
- 1/2 inch shank
- 180 degrees rotatable blade
- Suitable for plunge cutting
-
Trend CR/KFP/5 Kitchen Fitters Pack C153 Worktop Cutters x 5 pieces - 1/2 Shank
- Clean finish to abrasive materials
- For housing, grooving and mortising
- Non stick PTFE coated
-
Trend C208X1/2TC Intumescent cutter set 10mm x 40mm - 1/2 Shank
- For use with smaller routers
- Neatly cuts grooves on doors or frames
- To accept Intumescent Strip
-
Trend C174X8MMTC Dowel drill 5mm x 35mm cut - 8mm Shank
- Dowel Drill
- For drilling machines or routers
- Lip and Spur
-
Trend C164X1/2TC Two flute cutter 12.7mm diameter - 1/2 Shank
- Two flute carbide TCT tips
- Bottom cut feature
- PTFE coating
-
Trend C152X1/2TC Biscuit jointer set - 1/2 Shank
- Two flute carbide TCT tips for cutting biscuit slots
- PTFE coated
- For cutting biscuit slots in timber
-
Trend C143AX8MMTC Slotting 3.0mm cut x 31.8mm diameter - 8mm Shank
- 12.7 mm Diameter
- 9.5mm groove depth
- Easy to set-up and use
-
Trend C115X1/4TC Self guided trimmer 9.5mm diameter - 1/4 Shank
- 12.7mm diameter
- For copy profiling with a template
- Trimming plastic or plywood overlays
-
Trend C079X1/2TC Rounding over 12.7mm radius x 19.1mm cut - 1/2 Shank
- 12.7mm radius
- Two flute carbide TCT tips
- PTFE coated
-
Trend C078X1/4TC Rounding over 9.5mm radius x 15.9mm cut - 1/4 Shank
- 9.5 mm radius
- Two flute carbide TCT tips
- PTFE coated
-
Trend C077X1/4TC Rounding over 7.9mm radius x 12.7mm cut - 1/4 Shank
- 7.9 mm radius
- Self-guiding cutters
- PTFE coated
-
Trend C076X1/4TC Rounding over 6.3mm radius x 12.7mm cut - 1/4 Shank
- 6.3 mm radius
- Self-guiding cutters
- PTFE coated
-
Trend C075AX1/4TC Rounding over 6.0mm radius x 12mm cut - 1/4 Shank
- 6 mm radius
- Self-guiding cutters
- PTFE coated