Power Team PTPHA-213 Hydraulic Posi-Lock Puller - 25 Ton Capacity 2 Jaw

Product Code: PTPHA-213

£1,569.49 £1,307.91 £3,138.97 Save £1,569.48
  • Out of stock
  • Lifetime Warranty
  • 4 months at 0% interest with PayPal Credit. click for more info

A 2 jaw hydraulic puller, with a 305mm reach and305mm spread, with a capacity of 25 ton. Using a hydraulic puller system adds efficiency and eliminates unsafe practices such as hammering, heating, or prying components to be removed. The cylinder replaces the centre bolt function of the manual puller.
Hydraulic pullers come with a lift plate for ease of transport and lifting. In addition, ram points of different sizes are available for a variety of applications. Hydraulically powered to provide maximum extraction and controllability. Remote operation improves operator safety.
Power Team offers a comprehensive line of Posi Lock Pullers, powered manually or by hydraulics. These pullers are available in a two or three-jaw puller configuration. Mechanical pullers range from 1-40 ton capacity and hydraulic pullers range from 5-200 ton capacity. Turnkey kit packages are available to simplify your selection and set-up.
Slim tapered heat-treated tips allow for better gripping and easier access in tight spots. Safety Cage guides jaws for fast set-up, solid contact and superior safety.

Selecting a Posi Lock Puller


When selecting a puller it is important to consider three basic specifications:
Capacity: The amount of force the puller is capable of producing. Typically, the capacity required for a job can be determined by using the shaft diameter of the part being pulled. For manual pullers, the centre bolt diameter of the puller should be at least half the diameter of the shaft being pulled from. For hydraulic pullers, the puller capacity should be 7-10 times the diameter of the shaft.
Reach: The distance between the bottom of the base and the jaws. The puller's reach must equal or exceed the same distance of the part being pulled.
Spread: The distance between the jaws. The puller's spread needs to be greater than the width of the part being pulled.

NOTE: CYLINDER NOT INCLUDED FOR THE PTPHA MODELS
NOTE: The maximum force exerted in tons should be 7 to 10 times the diameter of the shaft in inches; for example, a 1.5"" diameter shaft would generally require a 15-ton puller.
NOTE: Each hydraulic puller is equipped with a set of four (4) ram tips in various sizes and shapes.

Buy Power Team PTPHA-213 Hydraulic Posi-Lock Puller - 25 Ton Capacity 2 Jaw by SPX for only £1,569.49
Buy Power Team PTPHA-213 Hydraulic Posi-Lock Puller - 25 Ton Capacity 2 Jaw by SPX for only £1,569.49
Part Number PTPHA-213
Display Weight (Kg) 21.3 Kg
Warranty Lifetime Warranty
Brand SPX
Reach 305mm
Max Spread 457mm
Max Rated Capacity 25 ton