Our 100-litre high flow air compressor and spray gun kit can provide you with everything you need to quickly and efficiently complete any spray painting work you may have and as well as this the versatility of the 100L capacity tank means it is perfect for your other air tool applications.

	The powerful 3 HP motor is capable of delivering up to 14.6 CFM.
	The 100 litre tank is ideal for spraying, nailing, stapling, sanding, drilling and cutting.
	Boasting twin outlets, this compressor can have two tools connected to it at once.

At SGS Engineering, all of our air compressors are hand-built by experts, are European CE and German CS certified for product safety and are designed to provide excellent, safe performance at great value. From professionals to DIY hobbyists the 100L air compressor can provide for you.

SGS are a British company with full spares, warranty and service centre based in our East Midlands HQ. Our air compressors are hand built by our expert engineers to the highest standard of quality and are European CE marked and German GS certified for product safety

Please note this compressor is for semi-pro and not commercial use.

The compressor is shipped with oil but may require additional oil before first use.

Air Outlet: 1/4" BSP to Euro Coupler. The fitting can be swapped for PCL fittings, please check Fitting & Couplers section.

Included in the kit:

100L air compressor
HVLP Gravity Fed Spray Gun
2x 10m long 8mm diameter Rubber Hose With Quick Couplers
Air Filter, Water Trap, Regulator & Lubricator
Euro quick couplers
Mini air filter
Compressor Oil - 1 Litre

Air Outlet: 1/4" BSP to Euro Coupler. The fitting can be swapped for PCL fittings, please check Fitting & Couplers section.

Covered by a 2 year extended warranty.

Due to a change in EU legislation the safety valve rings have been removed by ALL manufacturers of air compressors. This is due to the ring being incorrectly used to vent the compressor, causing undue wear which should not be present on a safety device. The air should drained from the tank via the valve on the belly of the tank. This location is used so that the water is drained at the same time.