The SGS 24 litre high flow air compressor is ideal for DIY and trade applications such as spray-painting, tyre inflation, nailing, stapling, sanding, drilling, cutting and grinding thanks to its impressive 24L capacity, high flow 9.6 CFM air displacement and 8 bar maximum working pressure. It offers a fantastic combination of performance, safety and value for money. Also included are all the hoses, accessories and fittings needed to start using the compressor with the air tool of your choice.

	The powerful 2.5 HP motor is capable of delivering up to 9.6 CFM.
	The 24 litre tank is ideal for spraying, nailing, stapling, sanding, drilling and cutting.
	Boasting twin outlets, this compressor can have two tools connected to it at once.

With this versatile air gun, it is easy to switch between nailing and stapling, making it the perfect tool for all kinds of jobs.

It can hold 100 brad nails or 80 staples, so you don't have to reload it too often during a job. And, with its low weight of 1.46kg (minus nails or staples), it is extremely comfortable to use.

Please note this compressor is for semi-pro and not commercial use.

Does not include nails or staples.

We would not recommend this compressor for use with most impact wrenches due to the tank size. We would recommend a 50L or greater tank size for use with impact wrenches.

Included:
24L air compressor
Combination 2 in 1 Air Nail & Staple Gun
10m long 8mm diameter Rubber Hose With Quick Couplers
Euro quick couplers
Compressor oil
Air line oil
Mini Inline Air Lubricator

The powerful 2.5 HP engine ensures a short wait for the tank to pressurise - keeping you working.

Fitted with safety valve and pressure regulator with gauges for controlled air pressure. Twin air outlets for increased versatility allow two air-lines / tools to be connected at the same time. Fitted with euro quick release connectors.

SGS are a British company with full spares, warranty and service centre based in our East Midlands HQ. Our air compressors are hand built by our expert engineers to the highest standard of quality and are European CE marked and German GS certified for product safety.

This compressor is fitted with a standard 13A UK plug.

Engine Size: 2.5 HP
Power Consumption: 1.5 kW
Voltage: 230 V @ 50 Hz
Rated Speed: 2850 rpm
Current: 7.5 A
Air Displacement: 9.6 CFM
Sound Level: 97dB
Discharge Pressure: 115 PSI / 8 bar
Restart Pressure: 70 PSI / 4.8 bar
Tank Capacity: 24 litres
Air Outlet: 1/4" BSP to Euro Coupler. The fitting can be swapped for PCL fittings, please check Fitting & Couplers section.
Dimensions: (L) 500mm x (W) 300mm x (H) 600mm

Nail Gun Kit:
Air Consumption: 1 SCFM
Magazine Capacity: 100 Nails / 80 Staples
Fastener Gauge 18 Gauge Brad Nails
18 Gauge Crown Staples
Fastener Lengths Nails (mm): 15, 20, 25, 30, 35, 40, 45, 50
Fastener Lengths Nails (In.): 5/8, 3/4, 1, 1-1/4, 1-3/8, 1-1/2, 1-3/4, 2
Fastener Lengths Staples (Mm): 13, 16, 19, 25, 32, 38, 40
Fastener Lengths Staples (In.): 1/2, 5/8, 3/4, 1, 1-1/4, 1-1/2 Covered by a 2 year extended warranty.

Due to a change in EU legislation the safety valve rings have been removed by ALL manufacturers of air compressors. This is due to the ring being incorrectly used to vent the compressor, causing undue wear which should not be present on a safety device. The air should drained from the tank via the valve on the belly of the tank. This location is used so that the water is drained at the same time.