SGS 24 Litre Direct Drive Air Compressor & Staple Gun Kit - 5.5 CFM, 1.5 HP

This air compressor from SGS is a really good product that has all the features you need, giving you a long and reliable life, enabling you to do a variety of jobs easily such as spray-painting, tyre inflation, nailing and stapling. This air compressor is ideal for those who are looking for at home or in garage use. Because this compressor is smaller and more compact than some of the other types available, it gives a great advantage to the ad hoc user. The powerful 1.5HP oil-free motor produces 180 litres per minute accompanied by a high flow of 5.5 CFM air displacement and 8 bar maximum working pressure.

	The powerful 1.5 HP motor is capable of delivering up to 5.5 CFM.
	The 24-litre tank is ideal for spraying, nailing, stapling, sanding, drilling and cutting.
	Twin gauges allow you to monitor tank pressure and tool working pressure.

Air Outlet: 1/4" BSP to Euro Coupler. The fitting can be swapped for PCL fittings, please check Fitting & Couplers section.

Please note this compressor is for semi-pro and not commercial use.

We would not recommend this compressor for use with most impact wrenches due to the tank size.

Included:

24L air compressor/nAir Staple Gun 20 Gauge 6-16mm/n10m long 8mm diameter Rubber Hose With Quick Couplers/nEuro quick couplers/nCompressor oil/nAirline oil /nMini Inline Air Lubricator

Nail Gun Kit:

The magazine holds 100 staples, meaning you don't have to worry about reloading too frequently. It is tested to the fullest for compliance with all applicable quality and safety standards and offers great value for money.

Air Consumption: 1 SCFM/nMagazine Capacity: 100 Pcs/nFastener Gauge: 20 Gauge Fine Wire Staples/nFastener Lengths (mm): 6 - 16/nFastener Lengths (In.): 1/4 - 5/8

Does not include staples.

Covered by a 2 year extended warranty./n/nDue to a change in EU legislation the safety valve rings have been removed by ALL manufacturers of air compressors. This is due to the ring being incorrectly used to vent the compressor, causing undue wear which should not be present on a safety device. The air should drained from the tank via the valve on the belly of the tank. This location is used so that the water is drained at the same time.