The SGS 24 litre air compressor has been designed with serious DIY enthusiasts in mind. The compressors lightweight and compact construction means it can be easily stored in a shed, garage or even the workshop.

	The powerful 2.5 HP motor is capable of delivering up to 9.6 CFM.
	The 24 litre tank is ideal for nailing, stapling, sanding, drilling and cutting.
	Boasting a quick-connect air outlet, pressure regulator and gauge.

Thanks to the air compressors handle and wheels it can be easily maneuvered. Unlike most others, this compressor is capable of working up to a massive 150psi which means that it holds more compressed air than others of the same size, enabling it to operate air tools and spray equipment far more efficiently. The compressor is fitted with a special heavy duty front mounted integral air hose reel holding 10 metres of PVC braided air hose and fitted quick release coupler. The 8 bar maximum working pressure, offers a fantastic combination of performance, safety and value for money. 

We would not recommend this compressor for use with most impact wrenches due to the tank size. 

Please note this compressor is for semi-pro and not commercial use. 

Included:

Compressor oil 
Air line oil 
Euro quick coupler  
Euro quick coupler  
Mini Inline Air Lubricator 
Mini Inline Air Filter & Water Trap 

Specifications:

Engine Size: 2.5 HP
Power: 1.8kW
kW Voltage: 230 V @ 50 Hz
Rated Speed: 2850 rpm
Air Displacement: 9.5 CFM
Sound Level: 97dB
Current: 8A
Motor poles: 2P
Discharge Pressure: 115 PSI / 8 bar
Tank Capacity: 24 litres
Air Outlet: 1/4" BSP to Euro Coupler. The fitting can be swapped for PCL fittings, please check Fitting & Couplers section.
Size: Dimensions: 60 x 29 x 64.5 cm

Covered by a 2 year extended warranty.

Due to a change in EU legislation the safety valve rings have been removed by ALL manufacturers of air compressors. This is due to the ring being incorrectly used to vent the compressor, causing undue wear which should not be present on a safety device. The air should drained from the tank via the valve on the belly of the tank. This location is used so that the water is drained at the same time.