SGS 24 Litre Direct Drive Air Compressor With Integrated Hose Reel & Staple Gun Kit - 9.5CFM 2.5HP 24L

This NEW and improved air compressor from SGS is an exceptional product that has all the features you need for a long and reliable life, enabling you to do a variety of jobs easily such as spray-painting, tyre inflation, nailing and stapling. This air compressor is ideal for those who are looking for at home or in garage use, because of the compressors compact size it can fit into small and often difficult to reach places, and it’s fully portable design gives a great advantage to the ad hoc user.

	The powerful 2.5 HP motor is capable of delivering up to 9.5 CFM.
	The 24 litre tank is ideal for nailing, stapling, sanding, drilling and cutting.
	Boasting a quick-connect air outlet, pressure regulator and gauge.

The Air Compressor Pump is directly coupled to the powerful 230v single phase GENUINE 2.5HP Motor (1800 watts) which produces 9.5CFM of displaced air. The pump and motor are mounted onto an ultra-safe 24 Litre air receiver which operates up to an impressive 150 psi maximum working pressure.

SGS is a British company; our air compressors are hand-built by our expert engineers to the highest standard of quality and are European CE marked and German GS certified for product safety. Parts, spares and consumables such as oil and air filters are available from SGS. 

Please note this compressor is for semi-pro and not commercial use. 

We would not recommend this compressor for use with most impact wrenches due to the tank size. 

Included

Euro quick couplers/nCompressor oil/nAirline oil /nMini Inline Air Lubricator/nAir Staple Gun 20 Gauge 6-16mm

Nail Gun Specifications: The magazine holds 100 staples, meaning you don't have to worry about reloading too frequently. It is tested to the fullest for compliance with all applicable quality and safety standards and offers great value for money.

Air Consumption: 1 SCFM/nMagazine Capacity: 100 Pcs/nFastener Gauge: 20 Gauge Fine Wire Staples/nFastener Lengths (mm): 6 - 16/nFastener Lengths (In.): 1/4 - ⅝

Does not include staples.

Compressor Specifications:

Engine Size: 2.5 HP/nPower: 1.8kW/nkW Voltage: 230 V @ 50 Hz/nRated Speed: 2850 rpm/nAir Displacement: 9.5 CFM/nSound Level: 97dB/nCurrent: 8A/nMotor poles: 2P/nDischarge Pressure: 115 PSI / 8 bar/nTank Capacity: 24 litres/nAir Outlet: 1/4" BSP to Euro Coupler. The fitting can be swapped for PCL fittings, please check Fitting & Couplers section./nSize Dimensions: 60 x 29 x 64.5 cm

Covered by a 2 year extended warranty./n/nDue to a change in EU legislation the safety valve rings have been removed by ALL manufacturers of air compressors. This is due to the ring being incorrectly used to vent the compressor, causing undue wear which should not be present on a safety device. The air should drained from the tank via the valve on the belly of the tank. This location is used so that the water is drained at the same time.