The SGS 50 litre high flow air compressor is ideal for DIY and trade applications such as spray-painting, tyre inflation, nailing, stapling, sanding, drilling, cutting and grinding thanks to its impressive 50L capacity, high flow 9.6 CFM air displacement and 8 bar maximum working pressure. It offers a fantastic combination of performance, safety and value for money. Also included are all the hoses, accessories and fittings needed to start using the compressor with the air tool of your choice.

	The powerful 2.5 HP motor is capable of delivering up to 9.6 CFM.
	The 50 litre tank is ideal for spraying, nailing, stapling, sanding, drilling and cutting.
	Boasting twin outlets, this compressor can have two tools connected to it at once.

Please note this compressor is for semi-pro and not commercial use.

Included:
- 50L air compressor
- 10m long 8mm diameter Rubber Hose With Quick Couplers 
- Compressor oil 
- Air line oil
- Euro quick coupler
- Air filter, water trap, regulator & lubricator 

The powerful 2.5 HP engine ensures a short wait for the tank to pressurise - keeping you working.

Fitted with safety valve and pressure regulator with gauges for controlled air pressure. Twin air outlets for increased versatility allow two airlines / tools to be connected at the same time. Fitted with euro quick release connectors.

SGS is a British company; our air compressors are hand-built by our expert engineers to the highest standard of quality and are European CE marked and German GS certified for product safety. Parts, spares and consumables such as oil and air filters are available from SGS. The compressor is shipped with oil but may require additional oil before first use.

This compressor is fitted with a standard 13A UK plug.

Engine Size: 2.5 HP
Power Consumption: 1.5 kW
Voltage: 230 V @ 50 Hz
Rated Speed: 2850 rpm
Current: 7.5 A
Air Displacement: 9.6 CFM
Sound Level: 97dB
Discharge Pressure: 115 PSI / 8 bar
Restart Pressure: 70 PSI / 4.8 bar
Tank Capacity: 50 litres
Air Outlet: 1/4" BSP to Euro Coupler. The fitting can be swapped for PCL fittings, please check Fitting & Couplers section. Covered by a 2 year extended warranty.

Due to a change in EU legislation the safety valve rings have been removed by ALL manufacturers of air compressors. This is due to the ring being incorrectly used to vent the compressor, causing undue wear which should not be present on a safety device. The air should drained from the tank via the valve on the belly of the tank. This location is used so that the water is drained at the same time.

The compressor is shipped with oil but may require additional oil before first use.