This compressor and ratcheting starter kit is ideal for someone looking to get into air tools or replace a tired, old compressor. Air compressor, impact wrench, hose, oil and socket set are all included in the kit, so you’ll have everything you need to get right to work. With an impressive air displacement of 9.6 CFM the air compressor is ideal for powering the 1/2” Air Impact Wrench. With a maximum torque rating of 340 Nm, this tough air tool is robust, durable and safe enough for numerous DIY and trade applications.

	The powerful 2.5 HP motor is capable of delivering up to 9.6 CFM.
	The 50 litre tank is ideal for spraying, nailing, stapling, sanding, drilling and cutting.
	Boasting twin outlets, this compressor can have two tools connected to it at once.

The compressor and air wrench conform to the highest of European standards, so you can work with full confidence in your new kit.


Please note this compressor is for semi-pro and not commercial use.

Included in the Kit:
- 50L Air Compressor
- 1/2” Air Impact Wrench With Rubber Grip
- 13 Piece 1/2" Drive Deep Air Metric Socket Set
- 10m long 8mm diameter Rubber Hose With Quick Couplers
- Euro quick coupler
- Compressor oil
- Air line oil

50 Litre High Flow Air Compressor specifications:
- Fitted with a standard 13A UK plug.
- Engine Size: 2.5 HP
- Power Consumption: 1.5 kW
- Voltage: 230 V @ 50 Hz
- Rated Speed: 2850 rpm
- Current: 7.5 A
- Air Displacement: 9.6 CFM
- Sound Level: 97dB
- Discharge Pressure: 115 PSI / 8 bar
- Restart Pressure: 70 PSI / 4.8 bar
- Tank Capacity: 50 litres
- Air Outlet: 1/4" BSP to Euro Coupler. The fitting can be swapped for PCL fittings, please check Fitting & Couplers section.
- Dimensions: (L) 700 x (W) 390 x (H) 710 mm

1/2” Air Wrench specifications:
- Free speed: 7000 RPM
- Max Torque: 250 FT-LB / 340 Nm
- Air Consumption: 8 SCFM
- Working Pressure: 90 PSI

The gun has four torque settings:
1# 147ft-lb (200N.m) ±10%
2# 177ft-lb (240N.m) ±10%
3# 199ft-lb (270N.m) ±10%
4# 250ft-lb (340N.m) ±10%

NOTE: The compressor is shipped with oil but may require additional oil before first use.
Covered by a 2 year extended warranty.

Due to a change in EU legislation the safety valve rings have been removed by ALL manufacturers of air compressors. This is due to the ring being incorrectly used to vent the compressor, causing undue wear which should not be present on a safety device. The air should drained from the tank via the valve on the belly of the tank. This location is used so that the water is drained at the same time.