SGS 50 Litre Direct Drive Air Compressor & 71pcs Air Tool Kit - Impact Wrench Die Hammer Ratchet & Grinder - 9.5CFM 2.5HP 50L

This model, equipped with a 50-litre receiver tank, is perfect for both DIY enthusiasts and trade professionals. It's ideally suited for a variety of applications including spray-painting, tyre inflation, nailing, and stapling. With a high airflow rate of 9.5 CFM and a maximum working pressure of 8 bar, this compressor offers an excellent balance of performance, safety, and value.

Key Features:

Powerful Motor

The 2.5 HP motor can deliver up to 9.5 CFM, ensuring that the compressor can handle demanding tasks with ease.

50-Litre Tank

The 50-litre tank is ideal for a range of applications such as spraying, nailing, stapling, sanding, drilling, and cutting, offering sufficient capacity to keep you working longer between refills.

Quick-Connect Outlet

Featuring a quick-connect air outlet, pressure regulator, and gauge, this compressor makes it easy to control and monitor air pressure.

Enhanced Efficiency

The powerful 2.5 HP engine ensures that the tank pressurises quickly, minimising downtime and keeping you productive. It's fitted with a safety valve and pressure regulator with gauges for controlled air pressure. The twin air outlets provide increased versatility, allowing two air-lines or tools to be connected simultaneously.

Quality and Compliance

SGS is a British company with a full spares warranty and a service centre located at our East Midlands headquarters. Our air compressors are hand-built by expert engineers to the highest quality standards and are both European CE marked and German GS certified for product safety. The compressor is shipped with oil but may require additional oil before first use. It comes with a standard 13A UK plug and features an air outlet of 1/4" BSP to Euro Coupler. The fitting can be swapped for PCL fittings; please check the Fitting & Couplers section for details.

Included Items:

• 71-Piece Air Tool Kit

• 10m long, 8mm diameter rubber hose with quick couplers

• Mini inline oiler

• Compressor oil

• Airline oil

Air Tool Kit Contents:

• 1 x 1/2" Air Impact Wrench

• 1 x 3/8" Air Ratchet Wrench

• 1 x 150mm Air Hammer

• 1 x 1/4" Air Die Grinder

• 1 x Air Blow Gun

• 8 x Impact Sockets: Sizes 9, 10, 11, 12, 13, 14, 17, 19 mm

• 1 x 3/8" To 1/2" Adaptor

• 1 x Screw Bit Holder

• 1 x Air Quick Coupler Female

• 5 x Male Nipples

• 1 x Female Nipple

• 3 x Chisels

• 1 x Spring Retainer

• 1 x Ball Foot Air Chuck

• 1 x Rubber Nozzle

• 1 x Safety Nozzle

• 1 x High-Pressure Nozzle

• 1 x Tapered Nozzle

• 2 x Sport Needle

• 1 x 1/4" Male-Female Nipple

• 1 x 1/8" Collet

• 10 x Grinding Mounted Stones

• 1 x Sanding Drum

• 10 x Sanding Sleeves

• 9 x Screw Bits

• 2 x Hand Wrenches

• 1 x 4mm Hex Wrench

• 1 x Teflon Tape

• 1 x Oil Pot

• 1 x Blow Mould Case

Specifications:

• Engine Size: 2.5 HP

• Power: 1.8 kW

• Voltage: 230 V @ 50 Hz

• Rated Speed: 2850 rpm

• Air Displacement: 9.5 CFM

• Sound Level: 97 dB

• Current: 8 A

• Motor Poles: 2P

• Discharge Pressure: 115 PSI / 8 bar

• Tank Capacity: 50 litres

• Air Outlet: 1/4" BSP to Euro Coupler (Fittings can be swapped for PCL fittings; check the Fitting & Couplers section).

Important Note:

Due to a change in EU legislation, safety valve rings have been removed by all manufacturers of air compressors. This is because the rings were often misused to vent the compressor, leading to unnecessary wear on the safety device. Air should be drained from the tank via the valve on the bottom of the tank. This ensures that water is drained at the same time, maintaining the compressor's integrity and performance.

This air compressor is covered by a 2-year extended warranty, providing peace of mind and ensuring long-term reliability.