The SGS 6 litre oil-less reciprocating air compressor is ideal for DIY and trade applications such as spray-painting, tyre inflation, nailing and stapling thanks to it's 6L capacity, high flow 5.7 CFM air displacement and 8 bar maximum working pressure. It offers a fantastic combination of performance, safety and value for money.
The powerful 1.5 HP engine ensures a short wait for the tank to pressurise - keeping you working. Fitted with safety valve and pressure regulator with a gauge for controlled air pressure. Fitted with a Euro quick release connector.
This compressor is fitted with a standard 13A UK plug.
Please note this compressor is for semi-pro and not commercial use.
- Engine Size: 1.5 HP
- Power Consumption: 1.1 kW
- Voltage: 230 V @ 50 Hz
- Rated Speed: 2850 rpm
- Air Displacement: 5.7 CFM
- Sound Level: 80 dB
- Discharge Pressure: 115 PSI / 8 bar
- Tank Capacity: 6 litres
- Air Outlet: 1/4" BSP to Euro Coupler. The fitting can be swapped for PCL fittings, please check Fitting & Couplers section.Dimensions: (L) 485 x (W) 265 x (H) 550 mm
Covered by a 2 year extended warranty.
SGS are a British company with full spares, warranty and service centre based in our East Midlands HQ. Our air compressors are hand built by our expert engineers to the highest standard of quality and are European CE marked and German GS certified for product safety.
Due to a change in EU legislation the safety valve rings have been removed by ALL manufacturers of air compressors. This is due to the ring being incorrectly used to vent the compressor, causing undue wear which should not be present on a safety device. The air should drained from the tank via the valve on the belly of the tank. This location is used so that the water is drained at the same time.