SGS 8 Litre Direct Drive Air Compressor & 5 Piece Tool Kit - 5.5CFM, 1.1HP

If you’re looking for a reliable air compressor set with an extensive range of air tools and accessories, then this SGS 8L air compressor kit is the perfect choice for you. The 5 piece compressor kit with quick release fittings is comprised of a gravity fed spray gun, a tyre inflator, blow gun, paraffin gun, a 4m spiral hose and pressure gauge. With it’s incredibly portable design, this compressor provides maximum performance and efficiency. This makes it optimal for a huge range of applications for example; spray-painting, tyre inflation, nailing and stapling. Thanks to 8 bar maximum working pressure, this compressor kit provides you with an incredible combination of performance, safety and value for money. This compressor is fitted with a standard 13A UK plug. 

	The powerful 1.1 HP motor is capable of delivering up to 5.5 CFM.
	The 8 litre tank is ideal for spraying, inflating, stapling, sanding, drilling and cutting.
	Boasting a quick-connect air outlet, pressure regulator and gauge.

SGS are a British company with full spares, warranty and service centre based in our East Midlands HQ. Our air compressors are hand built by our expert engineers to the highest standard of quality and are European CE marked and German GS certified for product safety. 

Please note this compressor is for semi-pro and not commercial use. 

Specifications 

Engine Size: 1.1 HP /nPower Consumption: 1kW /nVoltage: 230 V @ 50 Hz /nRated Speed: 3450 rpm /nAir Displacement: 5.5 CFM /nSound Level: 97 dB /nDischarge Pressure: 115 PSI / 8 bar /nTank Capacity: 8 litres /nAir Outlet: 1/4" BSP to Euro Coupler. The fitting can be swapped for PCL fittings, please check Fitting & Couplers section. /nDimensions: 510 x 250 x 510 mm 

Supplied with: 

Tyre inflator with pressure gauge /nAir blow gun /n4 metre spiral air hose /nOil spray gun with suction cup /nPaint spray gun

Covered by a 2 year extended warranty./n/nDue to a change in EU legislation the safety valve rings have been removed by ALL manufacturers of air compressors. This is due to the ring being incorrectly used to vent the compressor, causing undue wear which should not be present on a safety device. The air should drained from the tank via the valve on the belly of the tank. This location is used so that the water is drained at the same time.