SGS 20kW Diesel & Paraffin Heater | 68,200 BTU | Forced Air

The SGS 20kW Diesel & Paraffin Heater is a powerful, mobile heater for large spaces. Running on diesel or paraffin (kerosene), it suits workshops, garages, warehouses, construction sites and other areas that need efficient, portable heating. With an output of 20kW (68,200 BTU/h), it can heat areas of approximately 220–300m², depending on insulation and conditions.

A stainless steel combustion chamber is built for long service life, and multiple safety features — overheat shut-off, flame-out fuel cut-off and a thermocouple — add protection during operation.

The control panel makes setting your desired temperature straightforward, and the fixed fuel gauge lets you check fuel levels at a glance. With a 14-litre tank and fuel consumption of approximately 1.65kg per hour, it balances heating performance with practicality.

Key benefits:

• 20kW (68,200 BTU/h) heating output

• Runs on diesel or paraffin (kerosene)

• Heats areas of approximately 220–300m²

• Stainless steel combustion chamber

• Control panel for easy temperature setting

• Fixed fuel gauge for easy monitoring

• Overheat shut-off, flame-out fuel cut-off and thermocouple

• 550m³/h air output

• 14-litre fuel tank

Technical specifications:

• Heating output: 20kW / 68,200 BTU/h

• Fuel type: Diesel or paraffin (kerosene)

• Motor power: 230W

• Fuel consumption: 1.65kg/h

• Fuel tank capacity: 14L

• Air output: 550m³/h

• Suitable heating area: 220–300m²

• Cable type: H05RN-F 3G0.75mm²

• Cable length: 1.25m

• Plug: UK plug

• Product dimensions: 62 × 31 × 38cm

Please note: This is a fuel-burning heater and the fan requires a mains electricity supply. Not suitable for use in living or sleeping areas. Always ensure adequate ventilation, and read and follow the safety and operating instructions supplied with the product.