The SGS 6 litre oil-free mini air compressor is ideal for DIY and trade applications such as spray-painting, tyre inflation, nailing and stapling thanks to it's 6L capacity, high flow 6.3 CFM air displacement and 8 bar maximum working pressure. It offers a fantastic combination of performance, safety and value for money.

The powerful 1.5 HP engine ensures a short wait for the tank to pressurise - keeping you working.
Comes fitted with a long life pump and has 1 air outlet coupler with quick fit connector.

Fitted with safety valve and pressure regulator with a gauge for controlled air pressure. Fitted with a Euro quick release connector.

SGS are a British company with full spares, warranty and service centre based in our East Midlands HQ. Our air compressors are hand built by our expert engineers to the highest standard of quality and are European CE marked and German GS certified for product safety.

This compressor is fitted with a standard 13A UK plug.

Kit Contains:
1 x SGS 6 Litre Oil-Free Mini Air Compressor - 6.3CFM, 1.5HP, 6L
1 x SGS SAT502 HVLP 1000ML Aluminium Gravity Fed Spray Gun
1 x SGS SHR10-8 8mm Rubber Air Compressor Hose with Quick Couplers
1 x SGS SA10F Mini Inline Air Filter & Water Trap
1 x SGS SAF5 Male Quick Release Coupler to 1/4" BSPF

Please note this compressor is for semi-pro and not commercial use.

Specifications
Air Receiver Volume - 6 Litre
Air Displacement - 6.3 CFM
Max Working Pressure (BAR/PSI) - 8 BAR / 116 PSI
Horse Power - 1.5 HP
Wattage - 1100 Watts
Input Voltage - 230V
Wheel Mounted - No
Air Outlet - 1/4" BSP to Euro Coupler. The fitting can be swapped for PCL fittings, please check Fitting & Couplers section.
Dimension LxWxH (mm) - 345 x 360 x 300 Covered by a 2 year extended warranty.

Due to a change in EU legislation the safety valve rings have been removed by ALL manufacturers of air compressors. This is due to the ring being incorrectly used to vent the compressor, causing undue wear which should not be present on a safety device. The air should drained from the tank via the valve on the belly of the tank. This location is used so that the water is drained at the same time.