Metric Adapters & Speciality Pullers

Gear and pulley pullers, male and female threaded adapters, step plates and shaft protectors available to order individually or as part of a set. Ideal for customising an array of pullers and pullers for infinite applications.
Results per page: 24 36 96
Set Ascending Direction
Power Team 7393 Gear and Pulley Pullers - 5/8-18 x 140mm long screw
    • Ideal for pulling many small parts having tapped holes
    • Can be used with the bearing pulling attachment (1122) to remove bearings
    • 5/8-18 x 140mm long screw"
    Recommended for the removal of bearings, bearing cups, bushings and oil seals. Use with No. 939 Push-Puller. Learn More
    £24.60 £20.50 £49.20 Save £24.60
    Power Team 8056 6 Shaft Protector Push-Puller / Jaw-Type Puller Set
    • Designed to protect shaft centers from distortion when extreme pressures are applied.
    • Inserted between the end of the puller.
    • All the items shown may not withstand the full tonnage of the pullers they may be used with.
    Designed to protect shaft centers from distortion when extreme pressures are applied. Inserted between the end of the puller. Learn More
    £38.34 £31.95 £76.68 Save £38.34
    Power Team 7392 Gear and Pulley Pullers - 5/8-18 x 330mm long screw
    • Ideal for pulling many small parts having tapped holes
    • Can be used with the bearing pulling attachment (1122) to remove bearings
    • 5/8-18 x 330mm long screw"
    Recommended for the removal of bearings, bearing cups, bushings and oil seals. Use with No. 939 Push-Puller. Learn More
    01332 576850

    Out of Stock

    Power Team 522 Gear and Pulley Pullers - 3/4-16 x 295mm long screw
    • Ideal for tapped holes
    • Bearing pulling attachment
    • 5/8-18 x 140mm long screw
    Recommended for the removal of bearings, bearing cups, bushings and oil seals. Learn More
    01332 576850

    Out of Stock

    Power Team PA7 Four-in-One Puller Set - 7 Ton Capacity
    • 7 ton capacity
    • Quickly assemple a 2 or 3-jaw puller
    • Standard jaw max. reach is 127mm
    You can quickly assemble a 2 or 3-jaw puller with standard or long reach jaws. Four-In-One puller set, 7 ton capacity. Standard jaw max. reach is 127mm. Maximum spread is 267mm. Long jaw maximum reach is 222mm. Maximum spread is 279mm. Learn More
    01332 576850

    Out of Stock

    Power Team 518 Flange Type Puller with Screw Caps
    • Adjustable cap screws
    • Includes 3 cap screws
    • Power Team Lifetime Warranty
    Slotted holes in puller body permit cap screws to be positioned to handle bolt-circle diameters from 127mm. Learn More
    01332 576850

    Out of Stock

    Power Team 8044 6 Female Threaded Adapters Set - 5/8-18
    • 6 piece set of female threaded adapters
    • High quality accessories design
    • Lifetime Warranty
    Use these adapters on the ends of Push-Puller forcing screws, legs, or slide hammers. Use these adapters on the ends of Push-Puller® forcing screws, legs, or slide hammers in the removal and installation of shafts, axles, and housings. Learn More
    01332 576850

    Out of Stock

    Power Team 8075 11 Step Plate Adapters Set - 25.4mm to 63.5mm Diameter
    • 11 piece set of step plate adapters
    • Necessary for pulling and installing bearings gears or other parts on hollow shafts or housings
    • May be used with Power Team jaw-type pullers Push-Pullers® and shop presses
    Necessary for pulling and installing bearings, gears, or other parts on hollow shafts or housings. Set of 11 adapters (Nos. 8057-8067). Learn More
    01332 576850

    Out of Stock

    Power Team 8076 6 Step Plate Adapters Set - 66.5mm to 88.9mm Diameter
    • 6 piece set of step plate adapters
    • Necessary for pulling and installing bearings gears or other parts on hollow shafts or housings
    • May be used with Power Team jaw-type pullers Push-Pullers® and shop presses
    Necessary for pulling and installing bearings, gears, or other parts on hollow shafts or housings. Set of 6 adapters (Nos. 8068-8073). Learn More
    01332 576850

    Out of Stock

    Results per page: 24 36 96
    Set Ascending Direction

    Power Team Bearing Pullers from SGS Engineering

    Here at SGS Engineering, we’re proud to stock a wide variety of bearing pullers made by SPX Power Team. A bearing puller can offer you a number of applications such as installing gears, bearings, pulleys and other fitted parts. Equally, they are also used as a wheel bearing removal tool and will provide you with winning performance every time.

    Plus, the Power Team range of mechanical and hydraulic bearing pullers are made to the highest possible standard, so you know that you’re getting a model you can trust.

    Enjoy a Life Time Warranty

    As well as being manufactured to the exacting ASME B30.1 standard, you can enjoy a life time warranty on everything from our mechanical pullers to our other bearing extractor tools.

    All of our bearing puller accessory kits, maintenance/security chests and protective blankets support the wide range of pullers on offer as well.

    Shop our Bearing Pullers Range Online Today

    With such a wide range and variety available, we’re confident that we have the perfect model for you whether it’s a mechanical bearing puller or another bearing remover. As aforementioned, with options ranging from basic mechanical pullers to jaw spreads, complete puller and speciality pullers boxed sets and a wide range of accessories, we’ve got every wheel bearing puller option covered. So shop online with us today and place your order with SGS Engineering.
    ×

    SGS and other companies we work with use cookies to improve your experience, for analytics and to deliver relevant advertising on this and other websites. View Privacy Policy