Very fast delivery and exactly as described, the trolley jack works well and the axel stands are perfect. Had to buy rubber inserts for the axel stands which was a bit of a disappointment but otherwise exactly what I needed.

Excellent value. Purchased a low profile 2 tonne jack and axel stands, really pleased with them, great quality for the money. Good rubber pad for bearing against the car and nice swivel feature of the lever too.
Only negative I can say is the additional postage fees due to my location.

Plenty communication. I have purchased several item fr SGS and will continue to do so.

Low entry. Delivery on time!

Excellent service

Ordered late Thursday afternoon and the items came on Friday a little later than expected but got the items around 3pm The trolley jack and case + Two 4 ton axle stands looked good quality. I used them on Sunday, very nice bit of kit.

Excellent service, ordered after lunch on Tuesday, here before 11am next day. Will definitely order from SGS again.

Good price very quickly despatched and delivered.

Items were delivered on time. I am yet to use them, but I am sure they will be of a good quality.

Paid for a trolley jack & accessories just after 3PM Friday 19th Oct & it was delivered before 10AM next morning! It just doesn't get any better than that!! I will definitely use SGS again without doubt & can unreservedly recommend them to anyone.

Great quality products extremely fast delivery. Will definitely be using as a supplier from now on

Purchased low profile trolley jack, case and 4 ton axle stands. Would have liked to have seen SGS on the blow moulded case instead of just plain but aside from that everything looks good quality at an affordable price. All items arrived next day well packaged and as described. I look forward to doing business with SGS in the near future and would highly recommend this company.

"If one plans to change the wheel sets on the car to be appropriate for each winter and summer, then a handy trolley jack makes things so very much quicker and safer than fiddling about with the dodgy scissor jack supplied with the car. It could be down to just a few minutes for each corner if one also has the right tools for the wheel nuts and a hard level surface, preferably smoothly painted concrete, to stand it all on.

This trolley jack works as well as any other except for the operating lever having far too much slop, about a quarter of the lever travel is wasted when trying to raise the jack, and this is specifically why it lost a star. I have made some small changes to it to improve the action, but this should not have been necessary. I used to borrow from a neighbour his forty-year-old third-hand trolley jack nearing the end of a long hard life, and that had no such slop and offered beautiful control; that antique has set the standard.

This one is well constructed in the body with decent welding and thick steel, and the ram is oil-tight (so far) with no signs of weeping. The release valve is nicely progressive allowing a gentle lowering of the car. The wheels are good and solid as advertised, and I expect them to last me out with the light duty I will be putting it through.

The instruction leaflet is comprehensive with full instructions on Safety, Correct Use, Routine Maintenance, Purging, Oil Levels, etc, and even shows an exploded diagram of all the component parts, but it does not mention what grade of Hydraulic Oil should be used.

The plastic case is neat with rounded corners and secures the jack and its handle in the mouldings, so keeping the inside of a car boot clean and free of hard edged metal rattling about. The extra pad fits the cup/saddle on the jack and is hard enough not to be cut by the jacking edge of the car sills, but also soft enough not to dent them or bruise the paint (when being careful).

This low profile jack rolls under an NC MX5 without hitting anything to reach the correct point on the engine cross member, but the slop in the mechanism prevented it from being raised the first few inches because of the limited travel before the lever hits the front apron and engine under-tray. However, an improvised dogleg lever fitted into the modified handle socket now does work.

These JSR2 axle stands are rated at 2 Tons each, and are very nicely made from thick steel for the base and heavy castings for the ratchet column. The total weight the pair can carry is 4 Tons. When fully closed down (with the optional extra fitted rubber pads on top) they just go under the jacking points on the sills of both my cars, but when extended after jacking they allow the car to be held secure high enough for safe and easy access underneath. The ratchet mechanism is brilliant for quick setting and release, and with the safety peg inserted there will not be any inadvertent release.

I bought this set direct from SGS because as well as the free next day delivery they also added (for another fiver) the pair of shaped rubber pads for the tops of the stands, and still saved me a few pounds on the Az price (at that time)."

Hi, I never normally do this but just writing to say thanks . I only placed the order yesterday afternoon and it just arrived, at around 9am next day! Brilliant service. That coupled with really nicely packaged items, and within is a nice low profile jack which I think I'm going to feel the need to keep clean and shiny! :-) Will be using again and recommending.

Very nice trolley jack, the rubber pad for jacking point is a nice touch. The case is very handy as I can keep the whole thing in my boot for emergency tyre changes.

great little trolley jack, no problems fitting under my e30. I like how the handle rotates so you can jack it side on as well.

Very good jack & stands combo, I would recommend to anyone who needs a low profile jack. The delivery company were a day late delivering the axle stands but when they did arrive I was impressed. I will be purchasing a second set of stands in the future as I will be working over the summer on a project car.

really pleased with my jack and axle stands, i had a look and couldn't find anything at the same price elsewhere. jack is very low and has no problem lifting my Z3.

I got this jack as I was sick of the normal car jack. With the case I carry the jack around with me in the boot just in case I need it. The axle stands are sturdy and well made which is what you want when under the car!

I got this jack while it was on sale and it’s excellent value for money. Cheaper and better quality than some other jacks, and it includes a set of axle stands!! I received mine and had no problems, didn't have to bleed it or anything.

Really jack set item and a I don't think you can beat the price. The jack is very well made and includes a rubber pad to protect the car, the case is sturdy and the axle stands are rock solid. All the extras provided with this jack make it really good value for money.