Trend H/JIG/A Hinge Jig Two Part Metal Jig In Case. The Hinge Jig is a portable template set designed for recessing hinges in wooden doors & frames.

Key Features

- It is easy to use with minimal setting-up time, completing the job both accurately & quickly.
- Used on-site & in joinery shops to increase productivity with excellent results.
- Four apertures for fire door requirements.
- No need for marking out in the conventional way.
- Quick & simple to set-up as the hinge is used as the pattern.
- Clean & accurate recesses are achieved every time. Suitable for timber based doors & square butt hinges.
- Use with a light duty plunge router with 1/4 inch collet.
- Long reach router cutter required, 12mm diameter with 70mm overall length.
- Angled position slots to prevent creep.
- Unibase may be needed.


Specification

Hinge sizes possible
Length min.= 2 5/8" (67 mm)
Length max.= 5" (127 mm)
Width min.= 3/8" (9.5 mm)
Width max.= 1 3/8" (35 mm)

Door sizes possible
Height min.= 6' 5" (1955 mm)
Height max.= 2100 mm*
Thickness min.= 5/8" (16 mm)
* Please note for doors over 2040mm the bottom hinge will be higher than 9" up.
Weight= 3.3 kg
Jig overall length= 1957 mm

Product Includes

4 x Apertures
2 x Bradawls with spacer
1 x 16mm guide bush
1 x T-Handle hex key
1 x 4mm spacing gauge
1 x Carry case