Pro Multi-material jig for worktop joints 150mm - 900mm

Key Features

- FRONT EDGE SETTING All settings are done from the front edge eliminating any discrepancies from scribing or when using non standard width worktops
- EASY SET REFERENCE WINDOW Fast set up for any backset, simply align to a measured line
- 4 DIFFERENT JIG OPTIONS 660mm long (500mm maximum joint length) for narrow bathroom vanity tops, 990mm long (750mm maximum joint length) standard kitchen worktop installations and
1190mm long (900mm maximum joint length) for wider breakfast bars and peninsular joints and standalone connector bolt, hinge and tap hole jig
- ADAPTABLE MODULAR JIG Can be built to different sizes as required, allowing access where there is work space limitations
- FLUSH EDGE COMPATABILITY Allows worktops to be cut flush with door faces for handleless contemporary styles without additional measuring or marking up
- SINGLE PASS JOINT CUTTING ON NARROWER BACKSETS WITH THINNER WORKTOPS Minimises strain on the router and extends cutter life
- FAST JOINTING Cuts a full male and female joint in 15 minutes including setting up
- MULTIPLE WORKTOP MATERIAL COMPATABILITY Compact laminate, Composite, Solid Wood, Chipboard Laminate
- NO SET WORKTOP WIDTH RESTRICTION No need for alignment pins for worktop widths, cuts any sized joint
- FRUSTRATION FREE SETUP Simple intuitive setup; measure, mark, clamp and cut
- OFFSET CAMS Unique backset wedges for consistent easy setting
- EDGE PROFILE COMPATABILITY Covers square edge, small radius, Postform radius and bullnose profiles
- PORTABILITY Jig breaks down to easily portable components for storage and easy transportation

Specifications

- Length 1190 mm
- Width 335 mm
- Thickness 12 mm
- Weight 5.46kg
- End Cut 45 degrees
- Corner Radius 40 mm
- Corner Radius 100 mm
- Corner Radius 400 mm
- Corner Mitre Joint 45 degrees
- Female cut material width loss (inset) variable
- Bolt recesses 3
- Bolt recess centres 175 + 175 mm
- Bolt recess width 14 mm
- Guide bush 30 mm
- Plunge router 1/2-inch (min. 1300 watts)
- Cutter 12.7 mm x 50 mm cut
- Clamps Two
- Patent Pending

Product Includes

4 x ABS Plastic pins
4 x Cams (pairs)
1 x Hex key