FEATURES AND BENEFITS:

-Adjustable height to allow material from 12.7mm to 38mm to be jointed.
- Solid hardened bushes with fixed pitch of 30mm.
- Use on timber, MDF, plywood and blockboard.
- Workpiece support and end stop.
- Allows a variety of joints to be created individually.
- Quick and easy drill bit depth setting turret.
- Dust extraction spout.
- Square drive self tapping screws for use with a No.2 square drive bit to resist slipping (cam out).
- Workpiece can be handled immediately after gluing & screwing creating time saving benefits.
- No clamps required.

TECHNICAL SPECIFICATIONS:

- Material thickness min. 12.7 mm
- Material thickness max. 38 mm
- Material width min. 38 mm
- Hole pitch 30 mm
- Drill diameter 9.5 mm
- Square drive bit size No.2
- Dust spout ID 30 mm
- Underside T slot 12.2/8.4mm x 6mm

SUPPLIED IN THE BOX:

10 x No.7 x 25mm (1 inch) coarse
30 x No.7 x 30mm (1-1/4 inch) fine
30 x No.7/8 x 30mm (1-1/4 inch) coarse
10 x No.8 x 38mm (1-1/2 inch) coarse
10 x No.8 x 50mm (2 inch) coarse
10 x No.8 x 63mm (2-1/2 inch) coarse
1 x Face clamp
1 x HSS drill bit with collar
1 x 150mm Square drive bit
1 x Hex key 3mm A/F
2 x Workpiece support
1 x Carry case