Trend UNIBASE Router Base Adaptor

The Unibase enables routers with non-standard guide bush fittings to accept the range of Trend guide bushes. It will fit directly to most routers.

Key Features

• Line-up pin used with a 16mm plastic bush to ensure concentricity of the cutter to the guide bush when fitting the sub-base.

• Suits collet sizes 1/4 inch, 8mm, 12mm and 1/2 inch.

• Instructions for fitting

• The line-up pin fit into the collet and is plunged through the router base. The line-up bush is fitted into the Unibase and secured. This is then placed over the line-up pin and rotated in order to line up the fixing holes. The Unibase screws are tightened and then the line-up bush can be replaced with any choice of Trend guide bushes. These range from 10mm up to 30mm (GB10 - GB32). For larger diameter cutters a 40mm guide bush (GB40) is available.

• Ideal for hinge jig and lock jig

Specification

Diameter: 170 mm

Thickness: 8 mm

Bore: 39 mm

Recess: 60 mm

Weight: 0.351 Kg