Wera 05135973001 Kraftform Kompakt Micro 21 ESD set 21pc

Overview

Kraft form Kompakt Micro set for precision mechanical work. Suitable for the take-up of bits with 4 mm half-moon drive (Wera series 9) and bits with 4 mm HIOS drive (Wera series 21). Electrical surface resistance of < 109 Ohm for secure protection against electrostatic charge. Manufactured in accordance with DIN EN 61340-5-1. Compact handle/interchangeable blade system for fast blade change. Kaftform Micro handle with twist cap and free-turning zone for rapid twisting, making any time-consuming repositioning of the fingers unnecessary. Power zone with integrated soft zones for the transfer of higher tightening and loosening torque. Precision zone directly above the blade for the right angle for adjustment work. Bits for manual as well as power tool operations. Rapid fixing of the bit: just push the bit into the insert for automatic locking and a secure fit. To change the bit, simply push the sleeve forward and remove. Free-turning sleeve for simple guidance of the tool during the screw driving process.

Key Features

- Bit holder suitable for the take-up of bits with 4 mm half-moon or HIOS drive

- Handle out of material with a surface resistance of < 10^9 Ohm

- Kraft form Micro handle with swivel cap for rapid twisting

- Bits for manual as well as power tool operations

- In a practical pouch

What's included

1x Kraft form Kompakt Micro 21 ESD 1, 21 pieces; 1x 1013 Kraft form Micro ESD bit holding screwdriver, 23 x 97 mm; 2x 800/9 C bits: 0.23x1.5x44, 0.35x2.5x44; 3x 851/9 C J PH bits, half-moon: PH 000x44, PH 00x44, PH 0x44; 4x 867/9 C IP TORX PLUS bits, half-moon: 1 IPx44, 2 IPx44, 3 IPx44, 4 IPx44; 5x 867/9 C TORX bits, half-moon: TX 1x44, TX 2x44, TX 3x44, TX 4x44, TX 5x44; 1x 867/9 IPR TORX PLUS bits, 1 IPR; 1x 869/4 , 5.5 x 65 mm; 4x 872/9 bits for Micros tix screws: mx44, 00x44, Fx44, 0x44