• Browse
  • Help
  • Contact
  • Contact
BROWSE

SAVE

£625.32

Description

Specification

Product Manual

Product Reviews

Q&A

The power to make impossible jobs become routine. This 30 ton capacity push-puller set includes perfectly matched hydraulic components that can be detached from the Push- Puller® for other tasks requiring dependable Power Team power; assuring maximum return on your investment.

This kit includes:
Push-Puller®
RT302 center-hole Power Twin® cylinder
Cylinder half coupler
P55 pump
9767 1.8m polyurethane hose
9798 hose half coupler,
1110 457mm legs
28390 leg ends, 1 1/4"-7 x 610mm lg.
34758 Adjusting screw
27198 Adjusting crank

A wide variety of optional legs, threaded adapters, bearing pulling attachments and internal pulling attachments can be used in combination with our Push-Pullers®.

Selection and Capacity Rating
Each Push-Puller’s specified tonnage “capacity” is determined using its standard legs in tension. Using longer legs, or a setup in which the legs are in compression, will reduce the “capacity”. Always select the largest “capacity” puller and the shortest legs that will fit the job.

Power Twin® Cylinder
This unique center-hole cylinder powers each Push-Puller®. Puller screw runs right between the twin spring cylinder. A basic head allows you to change from a tapped hole to a plain hole by merely changing the head insert.

Use With:
679 Pulley Pulling Attachment
680 Bearing Pulling Attachment (Use two 8012 adapters to connect to puller.)
1109 203mm Puller Legs
1110 457mm Puller Legs
1111 711mm Puller Legs
1166 Internal Pulling Attachment

NOTE: L = leg length: 4 1/2", 9 1/2", 16 1/2", 22 1/2", 30"; subtract 4 7/8" from leg length to determine reach when using leg end caps.

Leg Ends - Upper leg ends are threaded 3/4"-16" lg. Lower leg ends are threaded 5/8"-18" lg.

Part Number PPH30
Product Weight 46.3
Warranty Lifetime Warranty
Brand SPX
Capacity (Tons) 30 Ton
Max Spread 178-413mm

Leave a Review

Write a review

Please select your rating from below
 
1 1 star
2 2 star
3 3 star
4 4 star
5 5 star
Quality
Price
Delivery

30 Ton Hydraulic Push-Puller Set - Puller, Cylinder, Pump & Accessories

Description

Specification

Product Manual

Product Reviews

Q&A

30 Ton Hydraulic Push-Puller Set - Puller, Cylinder, Pump & Accessories

Product Code: PPH30

£1,459.08

£1,215.90

£2084.4

save £625.32

+ -
  • In Stock
  • 3-5 day lead time from Holland
  • Lifetime Warranty

Product Description

The power to make impossible jobs become routine. This 30 ton capacity push-puller set includes perfectly matched hydraulic components that can be detached from the Push- Puller® for other tasks requiring dependable Power Team power; assuring maximum return on your investment.

This kit includes:
Push-Puller®
RT302 center-hole Power Twin® cylinder
Cylinder half coupler
P55 pump
9767 1.8m polyurethane hose
9798 hose half coupler,
1110 457mm legs
28390 leg ends, 1 1/4"-7 x 610mm lg.
34758 Adjusting screw
27198 Adjusting crank

A wide variety of optional legs, threaded adapters, bearing pulling attachments and internal pulling attachments can be used in combination with our Push-Pullers®.

Selection and Capacity Rating
Each Push-Puller’s specified tonnage “capacity” is determined using its standard legs in tension. Using longer legs, or a setup in which the legs are in compression, will reduce the “capacity”. Always select the largest “capacity” puller and the shortest legs that will fit the job.

Power Twin® Cylinder
This unique center-hole cylinder powers each Push-Puller®. Puller screw runs right between the twin spring cylinder. A basic head allows you to change from a tapped hole to a plain hole by merely changing the head insert.

Use With:
679 Pulley Pulling Attachment
680 Bearing Pulling Attachment (Use two 8012 adapters to connect to puller.)
1109 203mm Puller Legs
1110 457mm Puller Legs
1111 711mm Puller Legs
1166 Internal Pulling Attachment

NOTE: L = leg length: 4 1/2", 9 1/2", 16 1/2", 22 1/2", 30"; subtract 4 7/8" from leg length to determine reach when using leg end caps.

Leg Ends - Upper leg ends are threaded 3/4"-16" lg. Lower leg ends are threaded 5/8"-18" lg.

Technical Specification

Part Number PPH30
Product Weight 46.3
Warranty Lifetime Warranty
Brand SPX
Capacity (Tons) 30 Ton
Max Spread 178-413mm

Product Reviews

Leave a Review

Write a review

Please select your rating from below
 
1 1 star
2 2 star
3 3 star
4 4 star
5 5 star
Quality
Price
Delivery

Q&A