Power Team PPH50 50 Ton Hydraulic Push-Puller Set - Puller Cylinder Pump & Accessories

The power to make impossible jobs become routine. This 50 ton capacity push-puller set includes perfectly matched hydraulic components that can be detached from the Push- Puller® for other tasks requiring dependable Power Team power; assuring maximum return on your investment.

This kit includes:
Push-Puller®
RT503 center-hole Power Twin® cylinder
Cylinder half coupler
P55 pump
9767 1.8m polyurethane hose
9798 hose half coupler
1112 310 legs
32698 1 5/8"-5 1/2 x 722mm" lg. adjusting screw
29595 Adjusting crank

A wide variety of optional legs, threaded adapters, bearing pulling attachments and internal pulling attachments can be used in combination with our Push-Pullers®.

Selection and Capacity Rating
Each Push-Puller’s specified tonnage “capacity” is determined using its standard legs in tension. Using longer legs, or a setup in which the legs are in compression, will reduce the “capacity”. Always select the largest “capacity” puller and the shortest legs that will fit the job.

Power Twin® Cylinder
This unique center-hole cylinder powers each Push-Puller®. Puller screw runs right between the twin spring cylinder. A basic head allows you to change from a tapped hole to a plain hole by merely changing the head insert.

Use With:
1112 1112 Puller Legs
1113 1113 Puller Legs
1128 Bearing Pulling Attachment
Pair of puller legs for 50 ton “capacity” Push-Puller®.

Leg Ends are threaded 1 1/4"-12 x 1 3/4" lg.