SGS 100 Litre Direct Drive Air Compressor & 71pcs Air Tool Kit - 14.6CFM 3.0HP 100L

Product Code: SC100V-K3

£471.60 £393.00

The SGS 100 litre air compressor is ideal for DIY and trade applications such as spray-painting, impact wrenches, sanding, drilling, cutting, nailing and grinding thanks to its impressive 100L capacity coupled with a very high 14.6 CFM air displacement. It offers a fantastic combination of performance, safety and value for money. Also included are are all the hoses, accessories and fittings needed to start using the compressor with the air tool of your choice.


 The powerful 3 HP motor is capable of delivering up to 14.6 CFM.

tank sizeThe 100 litre tank is ideal for spraying, nailing, stapling, sanding, drilling and cutting.
outletBoasting twin outlets, this compressor can have two tools connected to it at once.

This 71 piece air tool kit is designed to give you everything you need to get started using your air compressor, including essentials and basics such as the 1/2 inch impact wrench, the 3/8 inch air ratchet wrench, and the 150mm air hammer, along with some more specialist and niche accessories and add-ons including both male and female nipples and 10 sanding sleeves. This kit has been produced specifically to make air compression tools simple to use, efficient, and cost-effective.

Please note this compressor is for semi-pro and not commercial use.

Air Outlet: 1/4" BSP to Euro Coupler. The fitting can be swapped for PCL fittings, please check Fitting & Couplers section.


100L air compressor
71pcs Air Tool Kit
2x 10m long 8mm diameter Rubber Hose With Quick Couplers
Air Filter, Water Trap, Regulator & Lubricator
Euro quick couplers
Compressor oil
Airline oil

The Air Toolkit Includes:

1pc - 1/2" Air Impact Wrench
1pc - 3/8" Air Ratchet Wrench
1pc - 150mm Air Hammer
1pc - 1/4" Air Die Grinder
1pc - Air Blow Gun
8pc - Impact Sockets: 9, 10, 11, 12, 13, 14, 17, 19 mm
1pc - 3/8" To 1/2" Adaptor 1pc - Screw Bit Holder
1pc - Air Quick Coupler Female 5pc - Male Nipples
1pc - Female Nipple 3pc - Chisels
1pc - Spring Retainer
1pc - Ball Foot Air Chuck
1pc - Rubber Nozzle
1pc - Safety Nozzle
1pc - High-Pressure Nozzle
1pc - Tapered Nozzle
2pc - Sport Needle
1pc - 1/4" Male-Female Nipple
1pc -1/8" Collet 10pc - Grinding Mounted Stones
1pc - Sanding Drum
10pc - Sanding Sleeve
9pc - Screw Bit
2pc - Hand Wrenches
1pc - 4 Mm Hex Wrench
1pc - Teflon Tape
1pc - Oil Pot
1pc - Blow Mould Case

The large air tank makes this compressor suitable for tools that require a constant supply of air, such as spray guns, impact wrenches and drills. The powerful 3 HP engine ensures a short wait for the tank to pressurise - keeping you working. Fitted with safety valve and pressure regulator with gauges for controlled air pressure. Twin air outlets for increased versatility allow two air-lines / tools to be connected at the same time. Fitted with euro quick release connectors.

SGS are a British company with full spares, warranty and service centre based in our East Midlands HQ. Our air compressors are hand built by our expert engineers to the highest standard of quality and are European CE marked and German GS certified for product safety. The compressor is shipped with oil but may require additional oil before first use.

Covered by a 2 year extended warranty.

Due to a change in EU legislation the safety valve rings have been removed by ALL manufacturers of air compressors. This is due to the ring being incorrectly used to vent the compressor, causing undue wear which should not be present on a safety device. The air should drained from the tank via the valve on the belly of the tank. This location is used so that the water is drained at the same time.
Buy SGS 100 Litre Direct Drive Air Compressor & 71pcs Air Tool Kit - 14.6CFM 3.0HP 100L by SGS for only £471.60
Buy SGS 100 Litre Direct Drive Air Compressor & 71pcs Air Tool Kit - 14.6CFM 3.0HP 100L by SGS for only £471.60
Part Number SC100V-K3
Display Weight (Kg) 57 Kg
Warranty 2 Year Warranty
Brand SGS
Lubrication Type Oil-Lubricated
Tank Size 100 Litres
Air Displacement (CFM) 14.6 CFM
Portable or Stationary Portable
Sound Level 97 dB
Power 2.2 kW
Engine HP 3.0 HP
Engine RPM 2850 RPM
Power Source Electric
Voltage 230V
Air Outlet Euro Quick Release
Discharge Pressure 116 PSI / 8 bar
Start System Direct Online

Help Centre

Our semi pro air compressors are great for a wide range of home based work or DIY tasks, such as: drilling, hammering, sanding, grinding, cutting, nailing, stapling, wrenching and more. We've put together a few compressor how-to guides and some safety information to get you started. These will tell you everything you need to know about our electric air compressors. For the best portable and small air compressors UK customers can find, SGS Engineering is the place to go.