Hydraulic Intensifiers for Sale

Identify pressure at a rate of 5:1 with any hydraulic intensifier for sale in our broad selection available here at SGS Engineering. Find a single or double-acting pressure intensifier along with jacks, crimpers, spreaders and other replacement parts and accessories to ensure all these tools run smoothly and efficiently. Whether you need a new hydraulic booster or just a replacement intensifier pump, all the options available here online are suitable for a number of different applications.
Results per page: 24 36 96
Set Ascending Direction
Power Team SS2 Slide Hammer Puller Set
    • Ideal for close-quarter inside pulling jobs
    • Good for removing small-bore bushings
    • Durable build
    Practical for pulling motor, generator, and magneto bearings. Also good for removing small-bore bushings, bearings and oil seeds. Contains jaw set 1172 and 1174. Learn More
    £181.87 £151.56 £303.12 Save £121.25
    Power Team 1178 Slide Hammer Puller Set
    • Ideal for those close-quarter inside pulling jobs
    • Very practical for pulling motor generator and magneto bearings
    • Perfect for removing small-bore bushings bearings and oil seals.
    Practical for pulling motor, generator, and magneto bearings. Also good for removing small-bore bushings, bearings and oil seeds. Contains jaw set 1172 and 1174. Learn More
    £240.34 £200.28 £400.56 Save £160.22
    Power Team 1170 38.1mm Spread Special Slide Hammer Puller
    • Ideal for pulling jobs in very close quarters
    • Perfect for the removal of small-bore bushings bearings oil seals etc
    • Handle end has a 1/2– 20 thread"
    Ideal for pulling jobs in very close quarters, as in removal of small-bore bushings, bearings, oil seals, etc. Internal pulling attachment has jaw spread of 12.7-38.1mm and a max. reach of 19.1mm. Learn More
    £83.38 £69.48 £138.96 Save £55.58
    Power Team 1171 54mm Spread Special Slide Hammer Puller
    • Ideal for pulling jobs in very close quarters
    • Perfect for the removal of small-bore bushings bearings oil seals etc
    • Handle end has a 1/2– 20 thread"
    Ideal for pulling jobs in very close quarters, as in removal of small-bore bushings, bearings, oil seals, etc. Internal pulling attachment has jaw spread of 22.2 to 54mm and a max. reach of 25.4mm. Learn More
    £93.96 £78.30 £156.60 Save £62.64
    Power Team 1172 50.8mm Spread Special Slide Hammer Puller
    • Ideal for pulling jobs in very close quarters
    • Perfect for the removal of small-bore bushings bearings oil seals etc
    • Handle end has a 1/2– 20 thread"
    Ideal for pulling jobs in very close quarters, as in removal of small-bore bushings, bearings, oil seals, etc. Internal pulling attachment has jaw spread of 12.7 to 50.8mm and a max. reach of 44.5mm. Learn More
    £83.38 £69.48 £138.96 Save £55.58
    Power Team 1173 Slide Hammer Puller No.1173
    • Practical for pulling motor generator and magneto bearings
    • ideal for removing small-bore bushings bearings and oil seeds
    • 1.6kg slide hammer puller only
    Practical for pulling motor, generator, and magneto bearings. Also good for removing small-bore bushings, bearings and oil seeds. 1.6kg slide hammer puller only. Learn More
    £101.52 £84.60 £169.20 Save £67.68
    Power Team 1156 Basic Hammer Puller with 1.1kg Hammer
    • Practical for pulling motor generator and magneto bearings
    • ideal for removing small-bore bushings bearings and oil seeds
    • 2.2kg slide hammer puller only
    Compatible with internal pulling attachment. Compatible with female-threaded adapters, and male-threaded adapters. 610mm in length, 5/8"–18 threaded end. 1.1kg hammer. Learn More
    £49.97 £41.64 £83.28 Save £33.31
    Power Team 1176 Reversible-jaw Hammer Puller with 1.1kg Hammer
    • Practical for pulling motor generator and magneto bearings
    • ideal for removing small-bore bushings bearings and oil seeds
    • 5/8– 18 threaded end so attachments and adapters may be used"
    Compatible with internal pulling attachment. Compatible with female-threaded adapters, and male-threaded adapters. 610mm in length, 5/8"–18 threaded end. 1.1kg hammer. Learn More
    £108.29 £90.24 £180.48 Save £72.19
    Power Team 1157 Slide Hammer Pullers with Cup Pulling Attachments & 1.1Kg Hammer
    • For removing oil seals outer races and bearing cups from blind holes
    • Cup pulling attachment
    • 102mm spread
    These combine a basic slide hammer with No. 1152 internal pulling attachment for removing oil seals, outer races, and bearing cups from blind holes. Learn More
    £164.23 £136.86 £273.72 Save £109.49
    Power Team HB443 HB443 5:1 Hydraulic Pressure Intensifier - Single-Acting
    • Control valve included
    • Features Posi-Check valve to guard
    • Lifetime Warranty
    Converts low-pressure portable hydraulic pumps or on-board hydraulic systems, into high pressure power sources at a ratio of 5:1. This model is suitable for single-acting applications. Learn More
    01332 576850

    Out of Stock

    Power Team HB444 HB444 5:1 Hydraulic Pressure Intensifier - Double-Acting
    • Control valve included
    • Features Posi-Check valve to guard
    • Lifetime Warranty
    Converts low-pressure portable hydraulic pumps or on-board hydraulic systems, into high pressure power sources at a ratio of 5:1. Hydraulic intensifier for double-acting systems Learn More
    01332 576850

    Out of Stock

    Power Team 981 Blind Hole Puller Set No. 981
    • Durable materials
    • Various removal applications
    • Expanding collets 8mm to 44.5mm I.D.
    Blind-hole puller set with slide hammer, forcing screw, bridge, actuator pins, collets, and storage box. Great for removal of bearings, bushings, sleeves and other friction-fitted parts. Learn More
    01332 576850

    Out of Stock

    Power Team 22185 1.1 KG Sliding Hammer
    • Ideal for those close-quarter inside pulling jobs
    • Very practical for pulling motor generator and magneto bearings
    • Perfect for removing small-bore bushings bearings and oil seals.
    Practical for pulling motor, generator, and magneto bearings. Also good for removing small-bore bushings, bearings and oil seeds. Learn More
    01332 576850

    Out of Stock

    Power Team 34331 2.3 KG Sliding Hammer No.34331
    • Ideal for those close-quarter inside pulling jobs
    • Very practical for pulling motor generator and magneto bearings
    • Perfect for removing small-bore bushings bearings and oil seals.
    Practical for pulling motor, generator, and magneto bearings. Also good for removing small-bore bushings, bearings and oil seeds. Learn More
    01332 576850

    Out of Stock

    Power Team 7136 Universal Bearing Cup Remover
    • Perfect for pulling internal bearing cups seals bushing etc.
    • Use with any slide hammer having 5/8-18 thread
    • Use with Power Team 1155, 1156 or 927 Push-Puller®
    The 7136 is perfect for pulling internal bearing cups, seals, bushings, etc. Jaw spread - 23.8 to 82.6mm, reach to 88.9mm. Use with any slide hammer having 5/8"-18 thread (Power Team 1155, 1156 or 927 Push-Puller®). Learn More
    01332 576850

    Out of Stock

    Power Team 1155 Basic Hammer Puller with 2.3kg Hammer
    • For pulling motor generator and magneto bearings
    • ideal for removing small-bore bushings bearings and oil seeds
    • 1.6kg slide hammer puller only
    Compatible with internal pulling attachment. Compatible with female-threaded adapters, and male-threaded adapters. 610mm in length, 5/8"–18 threaded end. 2.3kg hammer. Learn More
    01332 576850

    Out of Stock

    Power Team 1177 Reversible-jaw Hammer Puller with 2.2kg Hammer
    • Practical for pulling motor generator and magneto bearings
    • ideal for removing small-bore bushings bearings and oil seeds
    • 5/8– 18 threaded end so attachments and adapters may be used"
    Compatible with internal pulling attachment. Compatible with female-threaded adapters, and male-threaded adapters. 610mm in length, 5/8"–18 threaded end. 2.2kg hammer. Learn More
    01332 576850

    Out of Stock

    Results per page: 24 36 96
    Set Ascending Direction

    Hydraulic Intensifiers and Accessories

    Every hydraulic pressure intensifier we have for sale here at SGS Engineering has been manufactured by some of the finest in the industry. This means that each high pressure intensifier and hydraulic intensifier pump provides a reliable option for all manner of purposes. Utilities, railroads, construction, riggers and many more applications are ideal for any hydraulic booster pump and hydraulic pressure multiplier available in our selection.

    Find an SPX Power Team Hydraulic Intensifier at SGS

    Find a high pressure intensifier and hydraulic booster pump manufactured by SPX Power Team in our online listings. One of the industry’s leading manufacturers, they are so confident in the quality of their tools that each one comes with a Lifetime Marathon™ Warranty. So, if you require a hydraulic pressure amplifier or air pressure multiplier that is guaranteed to last throughout many light and heavy duty applications, these are the ones to choose.

    Contact Us for Hydraulic Intensifier Information

    To find out more about any hydraulic intensifier for sale here at SGS Engineering get in touch with us today. Call our prices and technical hotline on 01332 576 850 to get quotes and to ask any questions you have about a pressure intensifier, hydraulic intensifier pump or any other such tool, accessory or part available.